Search results

  1. R

    1996 Johnson J50tleds overheating

    Perhaps the buzzer is defective.
  2. R

    Classifieds

    It is frowned on and a NO , NO.
  3. R

    Lower Motor Mount Corrosion '04 Johnson 90

    Is this the 4 stroke ---Johnzuki -----Or the 2 stroke trusted Johnson ?-----Model number is ?
  4. R

    DF140 possible blown head gasket. Corrosion issues.

    Agreed.-----Remove the cylinder head first.------Best to have boat out of the water.
  5. R

    150 black max turbo starting

    Explain --" turbo " ---on this motor.
  6. R

    Converting a long shaft 1991 Evinrude E40TLESR to short shaft and tiller controls

    The 3 cylinder 25 / 35 was marketed from 95 to 2001 I believe .---Long shaft had a 5" spacer.------The 2 cylinder 30 / 35 was made for many years.----The 2 cylinder 35 did not leave the factory for all years , with a 5" spacer as far as I know.
  7. R

    Powerhead removal

    So was the driveshaft really stuck ?---Or those powerhead studs jammed in the exhaust housing ?
  8. R

    Converting a long shaft 1991 Evinrude E40TLESR to short shaft and tiller controls

    Short shaft in 40 / 50 / 60 HP motors is not very common.----Those 3 cylinder 35 HP are more common in short shaft.---And they do have the 5"spacer when leaving factory as long shaft..
  9. R

    Mercury 135 not running

    Too early in the morning to read that lower unit was removed.---Sorry.
  10. R

    1985 Evinrude 15 HP trouble starting

    Check the flywheel key.----A 1985 model has a choke.----Look and see if choke plate is actually closing.----Or put 6 drops of fuel in each sparkplug hole .---Install plugs.----Pull recoil 10 times.----Report what happens.
  11. R

    Mercury 135 not running

    Remove gearcase first.----Long shot that something is wrong there.-----With it nearly making a full turn it sounds like a piece of metal is loose somewhere.----Remove heads as stated.-----New to you motor ?
  12. R

    1978 Johnson 150 hp tach wire

    Blue , green and red are not the colors for the tachometer.----The grey , black and purple are the colors for a tachometer.
  13. R

    Kill switch question

    You will need to post a picture of your control box.----After market kill switches are available from Amazon.
  14. R

    Converting a long shaft 1991 Evinrude E40TLESR to short shaft and tiller controls

    There is no water tube on that motor.
  15. R

    Anyone give me some info on this Engine please!

    Something marketed by ----Volvo Penta I believe.----Try in Europe for a source for parts.
  16. R

    Converting a long shaft 1991 Evinrude E40TLESR to short shaft and tiller controls

    Are you sure you need a short shaft on a 16' Lund ??
  17. R

    Prop, or Engine Issue?

    Selectric and Electramatic are EXACTLY the same.----Johnson used a switch in the control box.----Evinrude used push buttons.----The rest is all the same except for paint color and cowling cosmetics.
  18. R

    Converting a long shaft 1991 Evinrude E40TLESR to short shaft and tiller controls

    A few questions.---Is it TESR or TLESR ?------Are you sure you need a short shaft on a 16' Lund ?----Are you sure it has a 5" spacer?-----Your location ?
  19. R

    Prop, or Engine Issue?

    I worked at a dealer back them---Worked on many electramatics ( wonderful design ) in that shop.-----Never saw an issue with the wires.
  20. R

    '74 Evinrude 9.9 Issue

    Well----I guess I missed the new fuel pump in post #1
Top