Search results

  1. Bondo

    Brand New Alpha 1 Gen 2 Outdrive - Noise when turned hard to port or starboard.

    Ayuh,.... I don't turn that tight, except at idle, for that reason,.....
  2. Bondo

    Trim Pump Fluid

    Ayuh,..... It don't matter,...... I use Atf in all of mine,....
  3. Bondo

    Lost gearage?

    Nope,.... Won't work,..... shifting is totally different,....
  4. Bondo

    Can the base of engine work? Two to bolts under engine are rusted and can

    Ayuh,...... That zero could be Tdc, compression, or Tdc exhaust, so you have to be Sure it's Tdc on the compression stroke, not the exhaust stroke,..... Otherwise, it won't start, nor run,....
  5. Bondo

    Bent steering cable on motor

    Nope,....
  6. Bondo

    Need help with plugs selection

    Ayuh,...... 'n the AC Delcos actually have a nickel alloy body, rather than carbon steel,.... Extremely rust resistant,......
  7. Bondo

    Lost gearage?

    Ayuh,..... I donno how yer spinnin' such a prop, as the Alpha drives only have 16" between the prop shaft, 'n the housing,.... My best guess is, with the 1.5:1 ratio, you'll need a 21" or 23" pitch, which will be something just over 14" diameter,.....
  8. Bondo

    2011 Mercruiser 4.3L TKS high temp @ low rpm

    Ayuh,...... Welcome Aboard,...... Start with a raw water pump kit, rather than just the impeller, 'n be careful you align it properly,....
  9. Bondo

    Might have a BIG problem…

    Ayuh,.... Welcome Aboard,...... Not putting foam in it, dramatically increases the chance of drowning if something goes wrong, no matter the size of the pond,.......
  10. Bondo

    Four Winns Color Codes

    Ayuh,..... Welcome Aboard,...... Bein' 33 years old, I'd suspect it's somewhat faded, so an exact color match, maybe up to the eye, not a color code,.....
  11. Bondo

    Damaged corner of swim platform - how to repair?

    Ayuh,..... Welcome Aboard,.... It would be an Ok bandaid, though bein' epoxy, gelcoat won't stick to it very well,....
  12. Bondo

    Unknown Short Circuit

    Ayuh,..... Welcome Aboard,...... With the key in the "On" position, is there power at the coil's (+) terminal,..??
  13. Bondo

    Missing Grommet for Depth Finder Through Hull

    Ayuh,..... Welcome Aboard,..... I usually use 4200 caulking, 'n a mini clamshell fitting to hide it,....
  14. Bondo

    Bent steering cable on motor

    Ayuh,..... Welcome Aboard,..... Most times, the motor has to be lifted to remove, or install the steering cable, to clear the splash well,..... Beating on it, is never an option,.....
  15. Bondo

    Lost gearage?

    Ayuh,......What is the size, pitch on it now,..??
  16. Bondo

    87 liberator motor mount/stringers

    Ayuh,...... Welcome Aboard,..... Ya, quality plywood the the common choice,....
  17. Bondo

    4.3L OMC Cobra 1988 engine knock/rattle

    Ayuh,.....The drive turns with the motor,... Pull the drive, 'n try it to see if the sound stops, or not,....
  18. Bondo

    4.3L OMC Cobra 1988 engine knock/rattle

    Ayuh,...... Welcome Aboard,...... Pull the drive, 'n try it, to see whether it's the motor or drive,....
  19. Bondo

    1996 SeaRay 215 Express Cruiser electrical issue

    Ayuh,..... Includin' the grounds,.....
  20. Bondo

    Need help with plugs selection

    Ayuh,..... Correct,.....
Top