Search results

  1. flashback

    is a 60hp outboard too small for this boat

    It is, I saw it in popular mechanics and pop said he would help build it LOL. we got the plans and he did the cutting and I got to do the glue and screw, along with the sanding and painting.. motor lasted a couple of summers, I blew it up and the boat has been in the shed ever since. Probably...
  2. flashback

    Can Rollers Damage the hull?

    Any way you cut it, bunks distribute the load over a much larger area and both need to be set properly.. roller or bunk.
  3. flashback

    is a 60hp outboard too small for this boat

    I have a hydroplane I built with dads help in 1961 called a scat cat he found a 18 HP merc that was less than 100 lbs. Still have the boat,a few years ago I thought about finding a motor but nothing is available these days that comes close..
  4. flashback

    Mini split outdoor condenser rodent guard advice

    That unit looks pretty tight the mouse might have entered it from inside the wall..in any case I feel your pain but I think I would look for the entrance rather than cage the entire unit.. The chicken wire I'm familiar with is too big to stop a mouse, hardware cloth would be a good choice.
  5. flashback

    Hard starting 4.3LX, normal or not?

    I guess you could wire a momentary button to energize the pump and prime the carb before you start cranking.
  6. flashback

    Forklift dropped boat on ground - damage?

    Pressurize the toon then check all the welds with soapy water...
  7. flashback

    Honda BF25A leaking oil when hot.

    I have an old BF 75 on a sailboat and a mud dauber type bug stopped up the crankcase breather hose which caused the engine to leak oil past the main oil seal under the flywheel..
  8. flashback

    is a 60hp outboard too small for this boat

    All good info, you may have a perfectly fine motor, provided you stick with the above advise..
  9. flashback

    is a 60hp outboard too small for this boat

    If existing motor runs decent give it a go and see if it makes you smile..
  10. flashback

    Dry Firing Outboard

    3 seconds at 700 rpm and you may be okay, 3 seconds at 3000 rpm and your probably not okay..
  11. flashback

    2019 25hp Yamaha Fouls lower plug but not the other ?????

    I think you're running on one cylinder.
  12. flashback

    2019 25hp Yamaha Fouls lower plug but not the other ?????

    Might want to try a new plug.
  13. flashback

    SEI Marine products...Anyone buy from them?? Quality??

    There has been some talk regarding early failure on I/O water pumps in the past from SEI..
  14. flashback

    Swim platform refinishing and anti-slip / skid

    Try a chemical stripper and then sandpaper. I wouldn't go back with varnish or the nonskid, just teak oil.
  15. flashback

    MerCruiser 3.0 - loud metal noise when in gear

    Try to get the rest of the bearing out of the gimbal housing and check the splines condition in the coupler.
  16. flashback

    Swim platform refinishing and anti-slip / skid

    Those almost looks like some kind of non skid tape. My last boat had a teak swim platform I just cleaned and oiled it once a year and it kept the nice warm brown color and was not slippery. No nonskid anywhere..
  17. flashback

    Winch post on boat trailer

    Very common to plant the trailer too deep until you find the sweet spot..
  18. flashback

    Alignment after transom replacement 1989 Cobra

    Yes the bearing is able to angle in all directions. Bump the alignment tool to move the bearing. Edit: my bad I was referring to a mercrusier, apologies.
  19. flashback

    Happy New Year!

    Happy new year to all of ya from me in east Tn.
  20. flashback

    Looking to find Glastron model and max hp motor

    LOL! Not exactly, there was some question tho.
Top