Search results

  1. jerryjerry05

    See ya around.

    Not gonna be around much for a while. One of my occupations is driving truck. Was contacted by a x employer and offered a job. This job starts at $.45 mi.(most companies start at $.32) New truck, benifits,etc. Really hard to turn down. Luckily I kept my CDL,with Hazmat and TWIC card. The bad...
  2. jerryjerry05

    Manual

    Yamaha 2005 15hp 15MSHD Any one know of any online manuals for this outboard? The bearing housing for the upper drive shaft is cracked. I need to know how to remove the drive shaft. Looks like I need to remove the pinion nut and and gear. The drive shaft has a "bump" that seems to hold in the 2...
  3. jerryjerry05

    Another, BE CAREFUL!!!

    Another time we were hauling a boat with a travel lift. The boat was on blocks and had just been painted. We were lifting it to move the blocks so the owner could paint the bare spots.(it was an owner job) The travelift was OLD probably 25-30 years old maybe older. They picked it up and the...
  4. jerryjerry05

    Be careful!!

    Was at work one day,getting a 28ft with twin 350's I/O's ready to deliver. The owner was there, he was sticking his head up under the drives and generally getting in the way. He's stuck his head up under the drive again and I said, you better move back as the lift was at it's max load. He said ...
  5. jerryjerry05

    1998 200 hp Johnson

    It starts and runs on only 1/2 of the cylinders. I've disconnected the stator leads and swapped them around like Outboard Ignition or CDI suggested. It still has spark only on the port bank.The other side is pretty much dead. I have a PRVM (peak reading volt meter)and will try some more tests...
  6. jerryjerry05

    Testing VRO Pump.

    Don't work on too many VRO Johnsons 1998 200 Carbed engine. Good comp120# Good spark. Started getting harder and harder to start. Then wouldn't start.Changed plugs. Started and burned off the buildup. Still seems to foul out the plugs too fast? How do you test the VRO?? Thanks,Jerry
  7. jerryjerry05

    Mecruiser 3.7/165/470

    My brother needs info on winterizing the Mercruiser 4 cyl. It's the one with the heat exchanger. The one Mercruiser built with a Ford 460 head. I usually do his winterizing but now I live in Fl. He's in Mi. He might post something later too. Any links or videos or online manuals will help...
  8. jerryjerry05

    Cartoon.No rods??

    Hadn't fished for about 6 mo. Windy. Decided to go out and try. We leave about 6am still dark. We got the boat loaded and started out. Some one says where are YOUR poles?? I say back at the house leaning on the picnic table!! Luckily the house was on the way from the ramp to the inlet! Another...
  9. jerryjerry05

    Be nice!!!

    I posted this a long time ago and it's always a good tale. We were putting in at Sandy Point State Park in Md. We had put in and was watching a couple try to retrieve their boat. The guy was in the boat and the wife in the truck, the window open and the rear slider open too.. He was shouting...
  10. jerryjerry05

    FIXXXXXED Overheat 2002 200hp SX200TXRB

    Hi all, friends 2002 200Yam is overheating. Impeller,housing,thermo's new(and good) within a year. Was running all day, no problems.Then started to get on plane to come in and the buzzer started going off. The buzzer went off and he didn't know what that meant. Ran it at his house and it still...
  11. jerryjerry05

    Red Snapper season

    Went out Friday.Got to the inlet and it was too rough. Stayed inshore and caught a bunch of small sharks. Went again Saturday. Much nicer day. Started 10-12 mi out and caught a ton of Sharpnose sharks. A few small Seabass and crap fish. Went another 7-9mi and hit some really nice spots. 1st fish...
  12. jerryjerry05

    Red Snapper Fishing

    The Red Snapper season is open this weekend. I'm looking for 1-2 people who want to go. My regulars can't make it. Sebastian, Fl. Chip in about 25-30 Bait/gas ain't cheap anymore.
  13. jerryjerry05

    Going out again Sunday,maybe Monday? 8/18,19 2013

    Gonna go Sunday maybe Monday. Anyone interested? Bottom fishing,chumming? Leaving Sebastian Inlet.Florida. I have an extra rod or 2 Last trip, we caught. Stone Fish,Cobia, Seabass,Trigger fish,sharks,snappers,grunts,Red Grouper and more. Share the fish and costs.About 30-35$ Send me a PM.
  14. jerryjerry05

    Variety.

    Went out on Tue.8/13/13 Left Sebastian Inlet about 6:45 Hit a waypoint from last year and started looking. In about 72ft. We were bottom fishing, looking for grouper,snappers or what ever bites?? We started out with a Cobia about 3-4in short. Then a Red Grouper again 3-4 inches short. Then an...
  15. jerryjerry05

    Links for winterizing a Mercruiser 470.

    My brother (in Mi.) needs to winterize a Mecruiser 470. When I moved to Fl. He lost contact with the only one around who could do it for free!!ME!! He's fairly mechanical and can use a computer. Any links to winterizing a Mercruiser.The one Merc. made? Thanks,Jerry
  16. jerryjerry05

    Hey Mods.Been having trouble with the site

    I open a site and post something and then try to back track and it only goes to a link to something else. I'll try to post the link. (http.//ad.doubleclick.net/adin8667.150) This shows up almost everytime I try to use the back button!!! It won't go back as it's on there about 40-50 times and I...
  17. jerryjerry05

    Grease keeping out the exhaust?????

    "grease the swivel bearing. impeller is probably sucking exhaust gases. This is a stringer and the grease is for keeping the exhaust out," Saw this on another site. Guy says the impeller was probably sucking exhaust gases and letting it overheat?? Can someone explain this? Or is it BS??
  18. jerryjerry05

    Carb questions??

    Have a set of carbs. They are from a 87/85hp Force. Tillitson WE-9-1 ( 3/86) " WE-9-2 (4/86) " WE-9-2 (5/86) Any body know what the #s are in in the brackets? Thanks,J
  19. jerryjerry05

    Dirty hull

    Boat,22 Winner has rust stains, and brown stains from the water. I've tried Comet soft scrub,it works a little. Anything work?? Thanks,Jerry
  20. jerryjerry05

    Stains on the hull

    Working on a 22 Winner The hull has brown stains from the water, rust stains and I need to get rid of them. What works and what might work? I've tried Comet soft scrub and it works a bit. Will black streak remover work? Thanks,Jerry
Top