Search results

  1. jerryjerry05

    how jump starter selenoid force 125

    Re: how jump starter selenoid force 125 To just turn it over? Just supply power o the yellow/red. But to make it fire or sprk to the cylinders you should hook up all the wires to a switch.
  2. jerryjerry05

    1989 50HP Force 507X9C

    Re: 1989 50HP Force 507X9C Profile,location? You might be close to someone who can help. Yes that would stop it from starting,dead short. Sounds like there was a loose connection and when you tried to start it it shorted and melted the cable/battery. Get a new cable or replace with at least...
  3. jerryjerry05

    Filter Blocked Again

    Re: Filter Blocked Again Yup a tank that's set for any length of time can go bad. Try a water/fuel seperating filter. Installed usually right after the tank and before the squeezie. The one shown has a see through sediment bowl. Down there probably be a million$$:) I also put a see through...
  4. jerryjerry05

    1975 Chrysler 459he 45 hp running issue

    Re: 1975 Chrysler 459he 45 hp running issue Was looking under the thumb.yes the hole should be blocked. Some rebuild kits have the welch plugs in them. When your done installing the plugs, use Indian Shelack to paint over the plug.It's gasoline proof.
  5. jerryjerry05

    1986 Force outboard tilt and trim

    Re: 1986 Force outboard tilt and trim Never saw one with gummed up hoses?? Unhook the lines. Take on oil can/pumper or someway to squirt oil into the lines. Then with compressed air try to blow it out. All the time lifting and lowering the motor to activate the trim cylinder. Goggles and a...
  6. jerryjerry05

    98 force 120 - random starting issue

    Re: 98 force 120 - random starting issue Don't just throw money at it!!! The starter's easy to check. Look for dirt and corrosion.See pics. The one is a brush holder for reassembly. Try taking the plugs out and turning it over. If it turns easily then you should really do a compression test.
  7. jerryjerry05

    1983 55hp timing

    Re: 1983 55hp timing Take the plugs out and ground the leads.If you just removed the electronics and didn't completly dismantle the parts. Then you should be real close to the correct timing. Pics of the flywheel and the hash marks. I'd like to see a pic of the dual carbs,J
  8. jerryjerry05

    Force 120 timing

    Re: Force 120 timing I read it wrong, Sorry. I thought it was a 99 My BAD!!!! Profile??? Location?? You might be close to someone who can help?? Now You still need the right manual for that motor.It covers static timing and dynamic timing. You need some way to ground out the plugs(see...
  9. jerryjerry05

    50 hp force no spark...

    Re: 50 hp force no spark... The puller PNW showed you might do it? Most times the 1/4-20 bolts strip and need to be tapped out to 5/16. I use a 3 jaw puller.Just be carefull it can hurt a finger if you don't wear gloves?? Safety glasses too.
  10. jerryjerry05

    HELP WITH A PICTURE???Mercury 135 Opti.2000

    . Was helping my neighbor and found a tube with a piece of broken hose hanging loose under the hood. Gotta figure out where it goes??? Didn't take anything apart yet.Just hoping for an easy fix. Started it up and no oil or gas came out. No vacume/vacum or water? Neighbor said it tastd like...
  11. jerryjerry05

    Trim cylinder

    I need a good trim cylinder or 2.Or any parts for trim system. My pumps seem to be good,just the trim cylinders and anyother parts?? I have 88/85 hp.The pics are some extra parts I have. EDIT If I'm breaking any rules?? Sorry. Note: It is okay now, Jerry.
  12. jerryjerry05

    '86 Force 125 trim won't go up

    Re: '86 Force 125 trim won't go up Ther MIGHT be a release on that pump but I wouldn't mess with it. Your only gonna make more work and possibly ruin it?? You check for fluid in the unit? Remove the plug and add some oil. I use an old style oil can.
  13. jerryjerry05

    Yamaha Oil System??Questions, downloads??

    My neighbor has a 05/200 hp Yam.Fuel injected. SX200TXRD The oil tank on the engine, should it be kept full when running by the motor? I pulled the cowl and first thing I noticed no oil in the bottle?? He had a problem and possibly scored one cyl(bot.L) Said the main oil pump was replaced but...
  14. jerryjerry05

    Interchangerbal carbs

    Re: Interchangerbal carbs Look at the bracket it has 2 holes for a 1/2in bolt. Then on the bottom a hole for a 3/8 or 5/16 bolt. Thanks. Anyone else have them?? I have T/T parts and brackets for 40/50. Also lots of other stuff.
  15. jerryjerry05

    Outboard motors come out of water in reverse

    Re: Outboard motors come out of water in reverse #37 first pic #8 second pic. Call sterndrive or outdrive or I/O The lock mechanisim is probably dirty/corroded. Even as far as the screwdrive on the tilt corroded or missing a part. See the attached pics. Always add the model# and type of...
  16. jerryjerry05

    force exhaust sound.

    Re: force exhaust sound. That black thing on the end of the prop shaft is for the older props. The blue lowers didn't use that. If you use an older prop it's needed. (I put a prop without using thru gouache and I think it went over tighten. )???? You mean the thrust washer? If it's...
  17. jerryjerry05

    Underpowered or overpropped

    Re: Underpowered or overpropped The first 2 pics,the right prop is a Force prop. Last pic is what they look like on the motor. You have the exhaust snout???
  18. jerryjerry05

    Force 50 flywheel questions

    Re: Force 50 flywheel questions Have either of the flywheels in the pic? One has a single hash mark Thats for TDC and the other has TDC and 3 marks for timing. Figure out TDC and see if the flywheel mark aligns? Top piston all the way out and the TDC mark should align?? Pics of the flywheel...
  19. jerryjerry05

    Motor or Prop problem; Viking, Force 120 hp (1995)

    Re: Motor or Prop problem; Viking, Force 120 hp (1995) What prop?Pitch? Running in a tank with a testing wheel and it gets 5000rpms? Then your prop and it gets 3000??? Need to do another compression/spark test. Get a spark tester that measures the strength of the spark.(see pic) Weak spark...
  20. jerryjerry05

    Starter

    Re: Starter Diagram
Top