Search results

  1. Bt Doctur

    Volvo penta 260A no spark on 1986 bayliner

    is there power at the coil and is it a standard round coil or a small square type with laminations? man overboard activated killing ign power?
  2. Bt Doctur

    Belts for 4.3 V6

    from your serial number alt is 46 inches,power steering is 52- 1/2
  3. Bt Doctur

    Mercruiser 888 Rehab

    sierra 18-2751 with ridge sierra 18-2752 without ridge sierra 18-2603 gen II shift cable kit
  4. Bt Doctur

    Mercruiser 888 Rehab

    you need to know if you have the one with the ridge or without shift cable: use the newer type for the alpha GEN II
  5. Bt Doctur

    Missing bolt behind motor

    no need to touch that when replacing bellows
  6. Bt Doctur

    I'm stumped, overheated 4.3 MPI, water in oil, replaced heads, still water in the oil

    file:///C:/Users/Edeward%20J/Downloads/Intake%20torque.pdf
  7. Bt Doctur

    Need help with a Mercruiser sterndrive and the trim sending unit.

    and those parts are NLA and its not a sending unit. just a switch
  8. Bt Doctur

    Intermittent electrical problem Mercruiser 3.0

    by the way the key doesent work the starter directly. power goes thru the slave solenoid first then to the starters solenoid
  9. Bt Doctur

    Ignition problems! Please help

    What voltage did you have when running ?
  10. Bt Doctur

    Little bit of help needed

    When reassembled will leave a final update on the overheating issue
  11. Bt Doctur

    Belts for 4.3 V6

    small around 5 inch, large about 8 inch
  12. Bt Doctur

    Little bit of help needed

    thought I`d drop and update on the motor. Have come to find out there are 3 thermostats on this motor. Finally got a pic from both crowley and another site and the hose config shows a thermostat just before the pressure relief valving Its number 33 in the diagrams. the same one used in the heads...
  13. Bt Doctur

    Belts for 4.3 V6

    do you have the large dia circ pully or the small one?
  14. Bt Doctur

    Rectifier Wiring - 1986 50hp

    if a 3 wire it will need a ground to operate correctly. yellow wires to stator, red to battery feed
  15. Bt Doctur

    Little bit of help needed

    pyro shows it climbing right to 212 alarm setting . definitely hot. with stats removed and water connected directly to the water inlet tube
  16. Bt Doctur

    Little bit of help needed

    did that, nothing came out but water
  17. Bt Doctur

    shift cable adjustment

    If it worked correctly previously over time cables go bad.There are many reasons for ratcheting so start with the simplest, pull drive and inspect the shift components. In fwd it could be a simple adjustment ,in rev it could be corrosion in the shift slide and no adjustment can correct this...
  18. Bt Doctur

    Little bit of help needed

    Evinrude E175FPXSSR Have a overheat on a customers motor and I`m not that familiar with these. changed wp kit, no damage seen changed thermoststs ,no change ran with thermostats removed, no change dropped lower unit and put hose directly to the water inlet tube. No change to the overheating...
Top