The three wire connector is so that pressure data can be fed to a Yamaha digital gauge. When an optional sensor is installed. You are not going to be using the connector. I only pointed it out because the sensor to which the connector is connected is plumbed to a port on the block. The same...
Clearly you have a different block.
Your model has provisions for an optional speed sensor and optional pressure sensor. The pressure sensor wiring connector has three wires going to it. Blue/black, black and orange. See if you can find that connector. Should have the letter W on the wiring...
The motor makers have dealers that are set for and intended to provide customer support. Thus Yamaha the USA distributor suggesting that a Yamaha USA dealer be contacted.
Here is the hook up point for an earlier model Yamaha F90. See if your motor has a similar connection point somewhere on it...
Unfortunately, Yamaha has to be this way. A customer misunderstands what he is being told to do, does something that is screwed up, which might cause damage, and he wants to blame Yamaha.
Do you know the model of your 2022 F90? It might just matter.
My guess would be that the majority of users don't want to have to engage a button before the motor can be shifted into gear.
In a panic situation (say the boat is about to be run over) where the boat needs to be shifted and throttled up quickly, I can see someone forgetting to press the...
Are you saying that the motor will not turn over with the remote controls and now it won't turn over with the rope starter?
Turn over to me means a motor being cranked (rotated) so as to start. As opposed to a motor that will crank but not start. Or which might crank and start but not run.
Are...
