Search results

  1. alldodge

    No fuel at rail with KO/EO merc 350 mag mpi tow sport (02 centurion)

    I have not ever done business with EMP Is this a QS pump or EMP pump? Has the fuel pressure gauge had the air bleed out of it? If it has then Try another test gauge Again we are talking about simple stuff. The correct HP pump can produce more then 60 psi, the correct Reg will reduce and hold...
  2. alldodge

    Glastron soft floor

    Welcome Yes Glastron makes a pretty cheap boat. What I see is 1/4 plywood and the rest is glass and gelcoat Best way to fix it to where it will last is rip it all out and start over. Otherwise I would cut a bunch more out of it. Maybe more toward bow then stern but doing both will increase...
  3. alldodge

    Crank no fuel - oil pressure safety switch ?

    The fuel pump does not have a regulator switch of some sort that would turn it OFF once pressure is reached. It has only an internal regulator which keeps pressure from exceeding a set point. Once pressure set point is reached the just stays running at that pressure With key OFF you should be...
  4. alldodge

    1973 Gibson help

    Good deal I would suggest get a manual like this one on EBAY It list part numbers which will always help Might also take the thermostat to NAPA or other parts house with a old white haired guy behind the counter
  5. alldodge

    Why I do not have new boats.

    Is there anyone that if they won or came into a 10 million in the bank would not buy a new boat or car? Remember, Grand Dad always said, the first lair doesn't stand a chance Comes down to how much you have been able to build over time. If you have been able to build a good size nest egg then...
  6. alldodge

    Affordable fuel injection intriguing

    No, the Mefi 1 and 3 also could control timing based on MAP and TPS
  7. alldodge

    WiFi Security cameras

    Yes, would like off and online Will look into Ampviz tx
  8. alldodge

    Affordable fuel injection intriguing

    Had EST on my 502 MPI
  9. alldodge

    OMC cobra new long block back firing when first starting

    Thanks, 4.3 reman I'll guess it's either crank and cam timing is off, or the valves are not adjusted correctly Do a quick compression test
  10. alldodge

    OMC cobra new long block back firing when first starting

    Not knowing what long block I'll ask is the cam and crank timing correct?
  11. alldodge

    Affordable fuel injection intriguing

    MSD - My Spark Disappeared
  12. alldodge

    Affordable fuel injection intriguing

    Not so sure along those lines, been a few building big motors on OSO that have had good luck with Holley Sniper EDIT: Wait, holley doesn't make the ignition. You use what ever ignition you want and build the fuel tables to match what is needed
  13. alldodge

    WiFi Security cameras

    Broad band is finally coming so I'm looking into long range wifi cameras. Long range in the wifi signal, not necessarily video. Want it for outside only. Solar powered with some kind of storage and without a service. Like to be able to see on my phone and be able to review footage later if need...
  14. alldodge

    Affordable fuel injection intriguing

    Flag on the play This means it's not USCG certified, only that if inspected it should pass because there is nothing obvious Look into Holley, they are CG cert
  15. alldodge

    Bilge Buddy Review

    I'm sure someone could make something up to notify a phone cheap Mount a float a bit higher like high water alarm. Connect a small motorize widget that moves/spins in front of a camera. One of those camera that you would mount on front door or such Sure need wifi or cell service, but if your...
  16. alldodge

    How to get old transom ports out/replaced/fixed.

    ok, Think the major issue is that the thru hulls are normall sealed with something like 3M4000 which will also be a bear to grind it out to reseal
  17. alldodge

    Throttle control Neutral button missing

    The ends on the shift plate end remain the same, only the bennacle end may have changed. I would suggest calling Merc Tech support with your motor serial number and model number from the binnacle. They can advise which ones/types will work 920-929-5040
  18. alldodge

    Volvo Penta VST problems

    Guess we're at a impasse, you belive you only need 10 psi and I say you need 30.
  19. alldodge

    Volvo Penta VST problems

    correct
  20. alldodge

    Volvo Penta VST problems

    Exactly which model would be good to know but it's not critical. All 5.7 GSI's are TB injected and all should have 30+/-2 psi at the TB. The only part that can be different is the LP pump for the LK-WT models which can have a low pressure LP pump. Your LP pump has been replaced so it should have...
Top