Search results

  1. P

    Oil pressure

    It was quicksilver. Just fell out. Weird as ive never seen this happen. We are good now thanks to all
  2. P

    Marine grease for gimball bearing

    Is lucas marine grease a good alternative for quicksilver or mercruiser extreme for gimball bearing thru stern drive grease fitting on i/o
  3. P

    Oil pressure

    Believe it or not guys when I went to Clean the bill jout. I found an oil filter o-ring took off the oil filter and it was missing. Never had that happen before, so thank God. That was it filled it up and were good to goClean the bill jout. I found an oil filter o-ring took off the oil filter...
  4. P

    Oil pressure

    Its a vacum pump with a very small hose takes hours to empty. It did remove 4.5 gals as normal but when refilled then kept filling so leak happening . Im going to tape the fill this time when it starts. Maybe ill see it. Just need my son to help. With filling or taping.
  5. P

    Oil pressure

    Yep hard to get under. There is a hose conne ted to the oil pan going up. Cant find in mNual what that is.
  6. P

    Oil pressure

    Never touched plug cant find it. Removwd by electrix pump from dipstick bass pro thinks dipstick may be brijen or loose but its emoty to thr very bottom of pan. See vudeo
  7. P

    Oil pressure

    Its strange but i filled the 1st 4 quarts as usual then it drani 3 more which would be too much. I drained 5 out of old oil. So i knew something was wrong. Its a i/0 pontoon so almost impossible to see under. Tried a selfie stick with phone and saw the pan but wasnt leaking. Im going to have...
  8. P

    Oil pressure

    Sorry didnt see it go. Hope its not a hole never burned any oil for a year
  9. P

    Oil pressure

    Emptied as fast as put in?
  10. P

    Oil pressure

    I changed my oil and filter it emptied as fast as i filled it to the bilge what could it be
  11. P

    2006 Sun Tracker Regency 25'

    I use purple power to even get to this point So looking to see if there's anything
  12. P

    2006 Sun Tracker Regency 25'

    I have a 27 foot pontoon. I have used acid on the wash. And I can't get the last layer of stuff off. It's like concrete. Does anybody have an alternative way to get this done
  13. P

    Installed rebuilt carb

    The manual says hook your meter up to this Gray wire on the bottom right hand side of this picture is what they do for a shot test but I need the plug that would go on there
  14. P

    Installed rebuilt carb

    Yes started at 1 and 1/2. I think it's just the way a tach tool operates?
  15. P

    Installed rebuilt carb

    Trying to find out if that wire needs a special shop tool to do rpm. The auto tach with the clamp is what I have attached to the plug wire and fluctuates.
  16. P

    Installed rebuilt carb

    This white wire
  17. P

    Installed rebuilt carb

    The manual says this wire is for shop tachometer.
  18. P

    Installed rebuilt carb

    Is there a special tool to read rpm. My auto tach fluctuates between 680 and 720 and 800 on muffs. When doing cars in the old days it seemed to be a steady number. Also should the clamp be on the #1 plug wire? Also is it imperitive to remove throttle cable for accurate adjustment. I know the...
  19. P

    Installed rebuilt carb

  20. P

    Installed rebuilt carb

    Is there a special tool to read rpm. My auto tach fluctuates between 680 and 720 and 800 on muffs. When doing cars in the old days it seemed to be a steady number. Also should the clamp be on the #1 plug wire? Also is it imperitive to remove throttle cable for accurate adjustment. I know the...
Top