Search results

  1. dingbat

    Just thought I'd share a nice photo.

    Caught several (undead) ones in the 8-10’ range last week off the Point.
  2. dingbat

    Just thought I'd share a nice photo.

  3. dingbat

    Orangish layer on boat will not come off

    This is what want I use. 1/4 bottle to a gallon of water in a garden sprayer. http://old.attwoodmarine.com/store/product/instant%20hull%20cleaner
  4. dingbat

    Orangish layer on boat will not come off

    No need to use anything other than oxalic acid and a garden sprayer. Disappears like magic Rinse trailer down with water before spraying
  5. dingbat

    FELL Marine MOB+ Install

    Don’t count yourself so lucky. The last guy they took 8 months to find fell out of 29’ boat ;)
  6. dingbat

    Live well overflow question

    I would say you’re missing the fact that the over flow, if it ever had one, was replaced with a side mount thru hull.
  7. dingbat

    Oil change interval, synthetic or no, curious what we all do

    I drive upwards of 30k per year. My daily driver (Civic) has 199k. The F150 (Ecoboost) has 52k and my wife’s Mazda 3 has 60k miles. All changed when the light comes on at roughly 6k miles. The F150 and the Civic get the “house” oil at the local oil change shop. The Mazda 3 requires synthetic...
  8. dingbat

    Correct prop size

    Prop calculator comes up with 39% slip using the figures you posted. 4700 at 30 kts is more inline with performance from a 17" prop
  9. dingbat

    Mercury bigfoot 60hp what running battery voltage is normal? 12.6-12.7v currently. Replace stator now?

    Sound like you charging system isn't working. Charge voltage varies between motors but typically 13.5 to 13.9 volts I would not replace the stator w/o doing some troubleshooting as other things can cause problems in the charging system, as you found out by replacing the regulator w/o the...
  10. dingbat

    How do you guys mix Gas

    …….
  11. dingbat

    97 merc 250efi crank but no start

    Pretty good chance your battery is the culprit. Suggest you have the battery load tested to determine condition.
  12. dingbat

    25 seapro 2 stroke - Oil/ fuel in water

    Could be.. It’s typically the result of the motor not getting up to temperature. My 200 HP does the same thing after a day of trolling in cold water. Goes way once water temps raise up a bit
  13. dingbat

    trailer tires

    What size tires you running now? My new #7450 GVWR (#6,000) trailer came with 215 75R14 Kendra Load Stars. C rated at #1870
  14. dingbat

    bilge problem

    Must have NVRAM like most computerized things. They saved 50 cents going with the power requirement
  15. dingbat

    Aerator water Pump & drain overflow port.

    Guess I didn’t understand your question. My over flow goes out a thru hull in the wall of the tank. To drain the tank I simply pull the plug. Sounds like you have to unscrew the stand pipe to drain completely
  16. dingbat

    How do you guys mix Gas

    That was 40 some years ago…. Fuel and oil formulations are very different now. Synthetics, semi-synthetic and heavy solvent loads (ease of mixing and injector use) were not the norm back then. Some oil brands have now gone as far as to advertise their oil’s “self mixing” qualities
  17. dingbat

    Aerator water Pump & drain overflow port.

    Put a cycle timer on the pump
  18. dingbat

    bilge problem

    They don’t “require” anything. It’s your choice to power memory or not.
  19. dingbat

    Random

    You’re very lucky. Here in Maryland it takes all of 3 minutes as well but my total came out to $161.50 for two years
  20. dingbat

    FELL Marine MOB+ Install

    This will be season 4. Had an auto-tether before this. Worked ok but not ideal. No regrets. Works as advertised. I’m free to roam about the cockpit
Top