Search results

  1. brian3127

    the fins on the lower unit

    they broke off. i found one of them. could i jbweld it back on. and then make another one out of jbweld and put that one on the other side of the lower unit.
  2. brian3127

    the iboat store

    i try to go to the iboat store and it is not working. or there is something wrong with my computer i cant see the adds. all i see are boxes with red X"s in them. is the site down or is there some settings i have to change to see them.
  3. brian3127

    gas tanks question

    i have a 6 gallon orange metal tank is there suppose to be a vent on it. everytime i open the tank air rushes in. or when im at wot the engine stutters sometimes and then runs fine for a while. and the motor doesnt really like to stay running at low rpms i dont know if that has anything to do...
  4. brian3127

    how long is gas good for

    i winterized my boat last year and put stabil in the gas tanks it had a half a tank left. i ran it a couple times this year. but havent been out for about a month and a half now. i have alittle over a 1/4 left is that gas still good. should i empty the gas out of it and put new in it our would i...
  5. brian3127

    bottom paint and fresh glass

    i have been thinking of getting a boat slip instead of trailering my boat. my question is should i paint the bottom of the boat where i fixed a hole in the hull before i leave it in the water. or will it be ok for the 1 1/2 months it would be at the slip before the end of boating season. and...
  6. brian3127

    what gear to tow a boat

    i bought a 98 chevy silverado this week. and im wondering what gear to tow the boat with. a friend told me i shouldnt tow the boat in over drive. but that was a manual tranny. is it ok to tow it in over drive with an automatic. it is a 14 trihull fiberglass with a 40 horse. the gears i have to...
  7. brian3127

    tachometer

    this boat is a 1975 trihull 14 footer so everything is getting old on this boat i was doing some work on my boat and i noticed when i was wiping everything down i ran my hand across the tach and the needle moved so i did it again to make sure i wasnt seeing things. and it pegged out at 5000 and...
  8. brian3127

    40 horse johnson

    i have a 40 horse johnson and im looking at getting another prop for it the prop that is on it is chipped up. with 3guys in the boat i got the boat up to about 14mph (gps) speed at 5000 rpm. im looking for speed not power or a mixture of speed and some power to get it up on plane with 3 or more...
  9. brian3127

    the drain hole for the boat

    i got the boat out today for another test run. to see how it handled after putting the bow seats in and noticed that the hole where you put the drain plug leaked. before we went out i adjusted the plug to fight tight in the hole then clamped it in. water wasnt coming in fast but i did come in...
  10. brian3127

    hugh humidity

    will poly resin cure in high humidity. i still have more glassing to do. all weekend its supposed to be humid.
  11. brian3127

    locking the o/b motor in the upright position

    i cant lock my motor up. i use a doubled up 2/4 with a bungy cord to hold it up for trailering. the problem is the splash well is in the way. the bolt that holds the sterring cable to the motor hits the splash well. is there i way i can fix it with out cutting a hole to compensate for the bolt...
  12. brian3127

    humminbird fish finder

    i dont have a problem with the electrical aspect of putting it in but i took the boat out on the water today. and at about 3000 rpm the boat plains out and i get a rooster tail from the transducer. does this mean its not in the water far enough. or is it something else when the boat is just...
  13. brian3127

    deck piant?

    i was at the big box store the other day and saw they heave a one part epoxy garage floor paint (cement paint). would that work in a boat
  14. brian3127

    capping the stringer

    how many layers of 8 oz. cloth should i put on the stringer for the cap and cross members.
  15. brian3127

    how many layers of glass

    howmany layers of glass should i put on the stringer of my 14 ft tri hull. i know that i should use 1708 but i didnt have that much money. i ended up buying 15sq yards of 8.2oz cloth and i have some about 9 sq yards of chopped strand i can get more of that it was cheap. the glass that was on the...
  16. brian3127

    fiberglassing the stringer

    what is the general rule on fiberglassing the stinger in. how far should the glass go onto the hull. each layer farther than the last one
  17. brian3127

    fiberglass repair kits from walmart

    how thick is the fiberglass cloth in the kit. i have a kit my dad gave me when he heard i was working on my boat. wondering if it is good for anything structual. thanks
  18. brian3127

    poly resin and blue board foam

    i did a search on here and i read that poly resin will eat up the blueboard foam that you can get at home centers. but i think that was when they pured it on the board. will the poly eat up the board if it has cured. because im using poly to do all the fiber glassing. trying to do this as cheap...
  19. brian3127

    fiberglass repair of a hole

    i did some grinding yesterday on the hull and found bondo used for a repair of a hole. it still leaked. i want to fix it with fiberglass. i got a repair kit from walmart. i was going to use the epoxy out of it to seal up the edges of the stringer and use the fiberglass for something else. will...
  20. brian3127

    pics of my boat project

    well that didnt work
Top