Search results

  1. flyingscott

    Bad starter?

    That was a long time ago before the EPA got involved. The new stuff is hardly worth the money but it does make a good dust remover.
  2. flyingscott

    1991 60hp Johnson Issue

    Stop loading the parts cannon and do the work. Get a factory manual and on ebay there is a $50 tester with DVA capabilities...
  3. flyingscott

    Looking for help !

    Is the eye clean and in good working order? None of the plastic bits on the stator are broke are they? Link and sync done correctly?
  4. flyingscott

    Looking for help !

    Sorry I missed that. Is this an OIS ignition ?
  5. flyingscott

    Looking for help !

    What is your compression? Spark on all 4 cylinders?
  6. flyingscott

    Bad starter?

    Try it once. If you get an old starter that needs to be replaced , take it apart and spray it down. The new carb cleaners are basically dust removers.
  7. flyingscott

    Persistent leak with paper gasket and form a gasket #2

    Are youbtightening the bolts from the middle out? Are you using a good quality gasket?
  8. flyingscott

    1991 60hp Johnson Issue

    Have you made sure that spark jumps a 7/16 air gap? Why did you replace the stator? Also make sure the wires line up. Sometimes CDI will have them in the wrong hole
  9. flyingscott

    1991 60hp Johnson Issue

    If that is CDI brand check the pins to make sure they are not bent in the plug. Also make sure the wires are in the right spot and correspond to the CDI unit. Could also have a faulty CDI or stator. Have you done a spark check?
  10. flyingscott

    1991 60hp Johnson Issue

    Did you replace the stator or the timer base?
  11. flyingscott

    Bad starter?

    I have done it more times than I can count and has no effect on the varnish. I have seen no adverse effects at all. I was just wondering if you had used some that did. That is not like gas varnish residue. I just picked up a 1993 evinrude 70 hp that I am going to clean the starter right now. I...
  12. flyingscott

    Bad starter?

    Have you ever seen carb cleaner dissolve the varnish on the windings? If so what kind of carb cleaner were you using?
  13. flyingscott

    Weep hole??

    Buy a complete carb kit with the fuel pump and primer diaphragm pieces. Otherwise you will be chasing failing gaskets.
  14. flyingscott

    1986 yamaha 150 pro v oil questions

    The oil on that motor never gets into the fuel system. You may need to adjust the oil pump, a manual or a dealer can help you find the specs. It could be the under the hood tank has to much pressure in it. I would buy a manual and do the proper trouble shooting. Was the motor smoking a lot? Is...
  15. flyingscott

    Engine flushing 150 yamaha

    edit
  16. flyingscott

    2005 yamaha 250 hpdi Stator or Rectifier

    Yeah I am not dragging this into another post good luck with that.
  17. flyingscott

    2005 yamaha 250 hpdi Stator or Rectifier

    I a sorry where did the OP have a pump problem? I thought he had a charging problem? Why is there a pic of a cheap chinese pump motor on a post about a stator? Did I miss something in this post?
  18. flyingscott

    Need engine rebuild kit 94-96 johnson/evinrude 150 ocean runner. 60 degree

    what kind of problems have you had with WSM?
  19. flyingscott

    Bad starter?

    Use brake/carb cleaner and clean the pinion shaft off. Might just have old oil on it and be sticky.
  20. flyingscott

    Trim Function for Yamaha 90 Four Stroke

    Been schooling you two on how to read a wiring diagram, Kinda hard to ask questions when the 2 main contributors are parts changers and confuse everything. Guaranteed you would be one of the biggest crybabies if somebody threw parts at you equipment!
View older results
Top