Search results

  1. A

    What size motor do I need?

    That 80 hp will probably push you around 20-24 mph, so if that is fast enough then good. Probably have a tough time pulling up a skier though. A 120 or there abouts would be a better choice for water sports and would get you closer to 30 mph or a little over depending on load in the boat...
  2. A

    Fuel line connection

    Why take a chance in a fuel leak ?? Fire and boats do not go together well !! Just bite the bullit and get a new hose and squeeze bulb and be safe. No sense risking your life or your passengers !!
  3. A

    New Purchase - 1977 14’ Stuery Walk-around

    Make sure your transom is strong, these old tri hulls used lots of plywood in their substructure, which can rot and cause a weak hull. Look for flexing in the transom while bouncing the motor up and down. If any leaks, look closely to find where they are comming from as this could be a sign of...
  4. A

    glastron fury

    Then you make an acess point, might not be much fun!
  5. A

    Need new axle.

    When I replaced mine, I had to match it as close as I could, a few minor mods were needed, but that is all.
  6. A

    Trailer Rust, cross members and welds.

    Plugging holes with JB weld will keep water from draining out and speed up the rust problem...I would rethink that step..
  7. A

    88 bayliner ciera 2556 command bridge.

    Before investing any money in it, do a thorough survey on the hull, stringers, transom etc, dont assume they are good!!! Be sure, if all is good then enjoy !!
  8. A

    Considering PWC over boat for time being

    Save your money and get a real boat. Gonna be really cold ridin a jet ski here pretty quickly...
  9. A

    What age of i/o style boat should I not consider buying?

    I would highly recomend an aluminum hull, only wood to wirry about is transom and floor and both a easy to repair. I have owned numerous alum hulls over my 60 years of boating. My 3.0 was very smooth, no vibration right down to 600 rpm. Easy on fuel and would hit almost 40 mph. Most aluminum...
  10. A

    Bilge pump wiring mystery

    Mmmm...might be tempted to try another brand..mabey that new technology isnt so great afterall...
  11. A

    New member here,not new to boats but never had to know the info I need now back then like I do now...LOL.

    Well, this could get interesting !!!
  12. A

    Are wheel locks the way to go?

    Just had another idea...paint it camoflage then no one will see it !!
  13. A

    Are wheel locks the way to go?

    Might very well work!!!
  14. A

    9.9 HP mercury O/B Starter cable

    Good to hear...
  15. A

    Bilge pump wiring mystery

    Shows how old I am......mine always had float switches....what will they think of next??
  16. A

    Are wheel locks the way to go?

    LOL....all depends on whether you are raised in the country or in the city !!
  17. A

    Making a kicker motor steering addition

    Yes, I use a small 2.2 hp gas for foward thrust, locked straight ahead. Then my 55 lb thrust trolling motor has autopilot and remote steering so I can pay attention to my rods and fish. Troller is controlled by a remote hanging around my neck. Works great....can tell it what course to take or...
  18. A

    Optimized prop for Lund Fury 1625 XL w/60hp Bigfoot

    Oh wow...Didnt realize the wot was that high !! Especially these newer 4 strokes... I stand corrected...
  19. A

    1986 75hp Mercury 4cyl shop manual

    I have a 1992 40 hp model , I found a used factory service manual on Ebay for inly 20 bucks. Nice thing to have, makes servicing these motors much easier, just make sure you get a " factory" manual and not a generic
  20. A

    1989 Mariner 20HP

    We have all done dumb things, that is how we learn !!! Glad you were able to find your issue.....
Top