Search results

  1. S

    1972 25hp evinrude water over flow issue

    Did you do a compression check? Do that before replacing gasket. Shop vac.....look carefully.... What area is leaking....report back.
  2. S

    1994 112 johnson special, blown cylinder? What now?

    Part it out....get an account with eBay and sell it to someone in fiji. Then fly there and personaly hand them the parts. Some motors are meant for stew!
  3. S

    Fuel line problem

    After I installed a (thread on filter), I removed the pickup screen all together. Never.... ever, had a problem again. Oxams razor!
  4. S

    Evinrude 30 hp compression question

    And if above, bore-a-scope through the cylinders or pull heads and resurface them. Easy to do.
  5. S

    1972 25hp evinrude water over flow issue

    I'd have to say you have a leak...and it seams like it's from everywhere! Anything coming out of your tell tale?
  6. S

    Have you ever seen this?

    I never do that....I just take it out for a spin on large bodies of water. I'm lucky!!😆
  7. S

    Have you ever seen this?

    2 acre pond? I'd leave the pond for canoers and go find a real lake. Preferably somewhere near the big city, let that smoke billow up into the air there keep it out of the ponds.
  8. S

    Have you ever seen this?

    Really? Look, deductive reasoning. I told you it needs to be on a boat or test tank or Dyno. Next best thing.....on a boat, hell tie it to the dock. Needs a load. Answer is, look at your own video. Your motor is engulfed in smoke. Barrel is for starting or fresh water rinsing. Your motor...
  9. S

    Have you ever seen this?

    Put a box fan next to it.....it's sucking fumes.
  10. S

    Have you ever seen this?

    New plugs, put it on the lake with someone else at the helm while you adjust everything under a load.
  11. S

    1979 25 HP Evinrude

    Find another guy.
  12. S

    Johnson 4HP questions

    You left out fixed jet carbs, or jets under the cowling and many other upgrades....at least most refer to them as "upgrades"
  13. S

    Gas - Oil Mixture on old Evinrudes outboards

    What oil brand and what HP motors and low speed only?
  14. S

    Gas - Oil Mixture on old Evinrudes outboards

    Yes, I agree. Mixing oil has been easy for me but I almost always use omc oil or any major marine brand.
  15. S

    1972 evinrude 25hp sparkplugs

    Nice....may want to get a kicker motor.
  16. S

    1979 25 HP Evinrude

    No need to replace safety switch if you have good spark. Look elsewhere or retest for GOOD spark.
  17. S

    200 HP 4 stroke susuki

    No other opinions? In my mind, flushing ports are for flushing when motor off, otherwise test tank/barrels or muffs when running.
  18. S

    Have you ever seen this?

    Sounds great.....needs to be put on a boat and run the crap out of it. Hallelujah brother!
  19. S

    Johnson 4HP questions

    Tim, did you look at my Suzuki thread?
  20. S

    Johnson 4HP questions

    Probably had a nice sail kit that you can buy for it...."wind stealers"
Top