this impeller fits sears,ted williams,gamefisher and more,,it is 1/2in thick and around 11/8"across the top,fits 3-15hp, 26251 pin impeller, not flat key,SEARS MODEL NUMBERS ON MOTOR MUST START WITH 217
you shouldnt have to. If there is pressure then its not venting properly.. Why make this harder than it is. I hope your not using a pressurized tank. Your unit has a fuel pump. What your saying really doesnt make sense even if you pump a primer ball till its hard it wont do that. Do you have a...
The main fuel nozzle is not fixed on that carb. Manual says to remove with slotted screw driver. Your float drop is shown in pic at 5/16 of an inch. Section 4 of the manual takes you through the steps to adjust, clean, service the carb. Like I noted earlier, the service manual is priceless when...
That main jet nozzle is fixed doesnt come out. If fuel is the issue did the plugs look really wet? Could be flooded or not getting enough.
The coil resistance chart is in the manual. Here is what i saw. The manual has all the details you should need to troubleshoot this. Does it have points...
Its made by Force and I had a 15hp but never had problems with it. If it quits running check for spark. You can google how to OHM the coils to see if they are bad. Add an in-line filter to it to see if your not getting fuel. Could be a number of things. What size is the motor?
first made in 73 all the way to 86. First does it have spark and compression? Next is it solid state ignition? Can you post some pictures?Im assuming it has the female adapter for the fuel line? When was the last time you know it ran?
Oh than if your gonna dump 2k in project Im all in. Thats alot of coin for a project. Im all about projects but Ive never dumped that kind of money on one. 200 bucks maybe but I tinker with the old stuff.
Id pass on that all day long. If the head gasket blew or the head cracked which Im sure it did you stand the chance that the rings on the 2 bad cylinders might be shot. For 2k get you a running motor that doesnt need work.
I can help with all that. The first thing to do is see if you have spark and compression. Take flywheel off and clean and re-gap points. You can get a prop on ebay. Before you dump money in it make sure its worth it first. Carbs gonna need gone through Im sure unless you got this already...
