Search results

  1. brim_buster

    sea king 15hp GG18737c / Gale 15d13 parts

    Alot of those parts are interchangeable with OMC Johnson Evinrude
  2. brim_buster

    Eska 3.5 HP Carburetor Main jet.

    https://www.arkansas-ope.com/TECUMSEH_CARBURETORS.html
  3. brim_buster

    Need info on a Tecumseh 7.5 carb

    https://www.arkansas-ope.com/TECUMSEH_CARBURETORS.html
  4. brim_buster

    Need info on a Tecumseh 7.5 carb

    https://www.ebay.com/itm/Eska-Outboard-Motor-Carb-Carburetor-7HP-631648-Tecumseh/193976284471?hash=item2d29e33537:g:1ogAAOSwYGxgVLx9
  5. brim_buster

    Eska 3.5 HP Carburetor Main jet.

    They only put 2 carbs on the motors and you have one of each. What is your float drop? 5.30mm between base of carb and float. Or use a #4 drill bit. The lean mixture or idle screw gets adjusted second. You adjust the main jet first like I stated 1 turn out from seated and go from there. You can...
  6. brim_buster

    Eska 3.5 HP Carburetor Main jet.

    How do you know its not the fuel pump diaphram? What year is the motor? Is you high speed main jet set properly? 1 turn out from seated to start out than adjust under load on a lake or river. the 3hp up to 7.5hp used 2 carbs. Is it points or Solid state. There are alot of variables.
  7. brim_buster

    Firestone 2hp 10A130 restoration project

    SWEET
  8. brim_buster

    McCULLOCH not running right

    sounds like its sucking in air from somewhere possibly.
  9. brim_buster

    1993 Sears Gamefisher Running for about 1 or 2 minutes then dies.

    click on the ebay link I posted with the carb kit. It should have the seat and gasket in that kit.
  10. brim_buster

    1946 Scott Atwater / Firestone 5HP????

    http://www.leeroysramblings.com/history_of_scottatwater.html
  11. brim_buster

    1946 Scott Atwater / Firestone 5HP????

  12. brim_buster

    1946 Scott Atwater / Firestone 5HP????

    4912 in 1949 was a 5hp. post pictures..
  13. brim_buster

    1993 Sears Gamefisher Running for about 1 or 2 minutes then dies.

    Its a very thing either nylon or red gasket but thats not gonna change anything. So your kit didnt have a new seat and gasket in it?
  14. brim_buster

    1993 Sears Gamefisher Running for about 1 or 2 minutes then dies.

    https://www.ebay.com/i/303834869521?ul_noapp=true
  15. brim_buster

    1993 Sears Gamefisher Running for about 1 or 2 minutes then dies.

    https://www.ebay.com/itm/GAMEFISHER-Carb-Kit-9-9-15-hp-Model-225/313456029080?epid=1929372491&hash=item48fb6f6d98:g:l5EAAOSwHOFeaoIe
  16. brim_buster

    1993 Sears Gamefisher Running for about 1 or 2 minutes then dies.

    No gasket. I went to the manual and it shows that the needle seat is removeable and can be replaced with one in the kit
  17. brim_buster

    1993 Sears Gamefisher Running for about 1 or 2 minutes then dies.

    did you ever put a new carb kit in it? With new needle valve? If your old one is worn it wont seat properly. Those are simple carbs you can get them at a lawn mower store or on-line.
  18. brim_buster

    1954 Scott-Atwater 10 hp project motor

    Ebay item#133638649182 fuel pump and carb I found all my parts to restore mine on Ebay
  19. brim_buster

    Firestone 2hp 10A130 restoration project

    I feel your pain. But after all this work you will have a vintage, running boat motor that will not only look good and run but you did it yourself.
  20. brim_buster

    1971 7.5hp Eska/Sears outboard with wrong lower unit installed

    Hoooray
Top