Search results

  1. jimmbo

    Tin Rig Tow Vehicle

    That looks like a Pontiac. I doubt it's Tow Rating is for more than 1000lbs. My Buick and Cadillac came from the Factory with the Towing Option, with Heavy Duty Suspension, Heavy Duty Brakes, Larger Capacity Cooling System with Mechanical and Electric Fans, Two Transmission Coolers, Modified...
  2. jimmbo

    1955 evinrude 15 hp fastwin

    Those were a couple of Pages from a 1957 35hp Owners Manual that I acquired in 1974
  3. jimmbo

    1958 Evinrude Big Twin 35

    By Over Torqueing the Nut, it pushed the Flywheel further down the Taper on the Crankshaft. That would stretch the metal, and from then on the Flywheel would be a little Lower than it is supposed to be. You already say it has hit things below it that it should have cleared. My Book doesn't show...
  4. jimmbo

    1958 Evinrude Big Twin 35

    My book says 60 - 65 lb ft for the Flywheel. Time for a new Flywheel As for the Cam, I was sure he meant that, but when I saw Camshaft...
  5. jimmbo

    1958 Evinrude Big Twin 35

    Camshaft Cam? Start at the Beginning. What all have you done to this motor?
  6. jimmbo

    Spreading Manure, again

    I see Boat Test is once again shoveling the Manure about an oddball Prop Design. This time 'testing' it on a Configuration that is rarely seen. All their past tests of this Prop, have been great examples of DoubleSpeak, even TripleSpeak, with outright Misrepresentation
  7. jimmbo

    Help with 1973 18hp Evinrude model 18304 A

    One of Magnets in the Flywheel hasn't given up the Ghost has it? Any history on this Motor? This is a Long shot, but, is it the correct Flywheel for that Motor?
  8. jimmbo

    1955 evinrude 15 hp fastwin

    If you are referring to the Lock-Release in this image, it is not to lock the motor tilted up, but rather in the Down Position
  9. jimmbo

    Lifting 16ft lund aluminium fishing boat off trailer

    Welcome to iboats Find a couple of Friends with Strong Backs and Weak Minds Secure the Trailer from Moving, unhook the winch, and pull Backwards, or secure the Stern of the boat, and pull the trailer out from under it. placing support under the hull as the trailer goes forward In reality, a...
  10. jimmbo

    service manual for 1975 15hp evinrude?

    Both electrodes work better if they are small and have sharp Edges
  11. jimmbo

    1150 Link & Sync Question

    It was in the 60s when Merc moved the Wire off the Switchbox and on to the Rectifier. However, it never hurts to check, just in case someone in the Past changed it
  12. jimmbo

    Oil Change question

    Tom Kelly, Joe Gavin, and others there, lead a very talented group, especially when one takes into account, no one had ever designed a Machine like that before, and they did it in less than 6 and a half yrs. We now return to the Regular Thread
  13. jimmbo

    Outboard will only start when given 10%-30% throttle. Will not start when given full throttle or half throttle.

    The motor or the woman? Edit: It has to be the motor, a woman is pretty much impossible to Solve.
  14. jimmbo

    Mercury 175 wont shift

    Before yanking the Powerhead, can you get a long Straw to shoot some penetrating oil at the Shift shaft bearing, but first check that rest the Linkage isn't seized up
  15. jimmbo

    Merc Outboard - 2 Year Old Engine Failure, 5 Year Extended Warranty Denied

    The reason Fogging Oil was used on 2 strokes was to coat the Bearings in the Crankcase, not to coat the Cylinder Walls
  16. jimmbo

    Boat motor won’t start

    Does it have an Oil Mixing System?
  17. jimmbo

    1150 Link & Sync Question

    Being a 77, your engine has a has a WOT range of 4800 - 5300 rpm. A 19 sounds a little long for what you have it on. A lot of boats in my area were running 17" on boats between 15ft and 18 ft. But the only way to know is to run it and see what RPM it pulls at WOT. My first boat was rated for...
  18. jimmbo

    Oil Change question

    True, if it has sat, but most people warm the oil up before draining it, so it would be well mixed
  19. jimmbo

    1150 Link & Sync Question

    The timing is advanced to increase engine speed, then as it reaches a certain point of Advance, the carbs open a bit, then after the timing is fully advanced, further movement of the throttle opens the carbs fully. Once the engine reaches higher RPM, the throttle can be pulled back and this...
  20. jimmbo

    Oil Change question

    Check out the History of the Moon Program, a lot of the Measurements used in Apollo were metric
Top