Search results

  1. T

    Air intake for a 1974 9.9hp Evinrude

    Try wiggling the wires around while it running and see if anything changes. Any chance there is some lose Insluation in the cover thats getting sucked into the carb throat?
  2. T

    Air intake for a 1974 9.9hp Evinrude

    I was thinking the same thing. Make sure all your wiring is in order and no lose wires to short to ground when the cover is on. You could be losing a cylinder due to a short.
  3. T

    Johnson 150 Rebuild/Remanufacture Guidance

    I just have to add my 2 cents and give Bill from Master Tex Marine 👍👍 up. He provides a great service, quality parts and honest pricing. All the Best on what ever you decide to do.
  4. T

    Small Flywheel Tool

    If you don’t have access to the impact driver make a strap wrench from an old belt or webbing from a hold down strap and a pice of wood.
  5. T

    68 Johnson 9.5

    How big is the boat? I just don’t know that your going to get much more out of this motor. Your likely just under powered. I mean you could get into trying different props but even if you find a better match it’s more than likely not going to be that much of a difference but it’s not out of the...
  6. T

    68 Johnson 9.5

    If its parallel now then try moving down a hole. It looked like it was all the way down in the vid. Also these older motors were more about torque than high end rpm. You may just be out of luck.
  7. T

    68 Johnson 9.5

    Try moving the tilt pin up one hole and your gas tank up forward. This my help you get up on a plane. good luck.
  8. T

    Spark plug question

    Good day all I have picked up a 1985 30hp Johnson J30elcoa and it’s a 100/1 mix I’m not crazy about running that so I’m going with 50-1 but the plugs are fouling and it just doesn’t run as smooth with this mix. Does anyone have a suggestion on using a hotter plug? thanks for your help Tim
  9. T

    Carb trouble

    Hi all it’s been awhile but I’m back on a new project. I have an 87 J25rcur that’s running rich. I have had the carb apart several times now and there is no passage that has not been cleared. The only thing I have left to try is to try and get the nylon seat for the slow speed Neddle out...
  10. T

    85 Johnson 25 hp

    Hi all its been sometime now for me and I'm in need of a little help I just finished rebuilding an 85 j25rcur from the ground up. It went for a swim 10 years ago and now it lives to see another day. So after the rebuild it was time to see if she would start! She did! It fired up on the 2ng...
  11. T

    Torque specs for 25 hp Johnson

    Hi I'm looking for the torque specs for the J25RCUR it's an 87 25hp Johnson. Im rebuilding the power head and don't have the manual. Can anyone help me out with this. Thanks Tim
  12. T

    2002 Johnson 40hp stalls when fogging top cyclinder only

    Sadly I had to winterize the boat today and when doing so I found that when I fogged the top carb the engine stalled and when I did the bottom carb the rpm's increased. This has never happened to me in the past. In past years the rpm's would drop on both top and bottom but never stall in one and...
  13. T

    What year?

    I looking for the year of a Mercury 50hp. # 6450872 4cyl. Thanks
  14. T

    Controls for a tiller motor

    Hi all. I have a 2002 jhonson 40hp J40RLSNF It's a tiller motor with the shifter on the front no electric start. I would like to change it over to a remote motor. I see that I can get the steering kit so that's no trouble but my question is does anyone know if the control cables will hook up to...
View older results
Top