Search results

  1. Dukedog

    96 150 Mercury efi some pistons not moving

    yes it could.. only crank i had break several years ago it broke so clean tha motor would try ta run on 4 cylinders.. not to good but would still try ta run....
  2. Dukedog

    96 150 Mercury efi some pistons not moving

    sounds like tha crank broke.. maybe rods but usually if rods break it tears up a lot more stuff and will only turn a little one and/or both ways.. not to common but does happen...
  3. Dukedog

    V150 XR4 fuel and oil question

    bone stock "fishin' motor think thats a good idea anda place ta start.. cheap and can't hurt a thing.... jmo, gl.
  4. Dukedog

    V150 XR4 fuel and oil question

    no it won't.. pressure valve (under starter) needs to go.. needs ta be plugged.. it pressurizes tha big tank to force oil to tha motor tank.. no fuel gettin' ta motor probably needs fuel pump?... i use ta keep a low pressure 'lectric pump jus for that reason.. use ta test.. but i also run...
  5. Dukedog

    200 efi

    like Faz says, if its been taken care of its a very good (maybe a little thristy) motor... these are some of tha main things ya might wanna ask of tha PO... still have tha oil injection?.. idle module, detonation module?.. still on it and working?.. last time a "pump kit" (water pump) was...
  6. Dukedog

    1992 mercury 150 xr6

    for me.. way to many variables ta recommend what MIGHT or MIGHT not work ona computer!.. boat type?.. offset?.. motor height?.. load?.. max rpm?.. etc.
  7. Dukedog

    2002 Mercury 150 EFI overheating drama.

    mechanical... you will see a hose that starts at top, center (right behind tha flywheel) of tha block that goes down to tha poppet cover.. you will need to add a "t" in that hose at top of block that will supply tha gauge.... jus google "marine water pressure gauge".. choices are plentiful! (0...
  8. Dukedog

    1992 mercury 150 xr6

    ya might hafta hunt down a different prop cause of tha different physical size and ratio.....
  9. Dukedog

    2002 Mercury 150 EFI overheating drama.

    divider and heads yes.. adapter plates, powerhead has to come off... have you got a water pressure gauge?
  10. Dukedog

    2002 Mercury 150 EFI overheating drama.

    "There were 3 small stones and a tiny piece of stick in the poppet table cavity after the valve seat." this would give reason to pull divider plate check, clean.. pull powerhead to check, clean adapter plates.. heads could possibly be involved also. water pump "kit"? or jus tha impeller?
  11. Dukedog

    What Force by merc lower unit will fit my 1985 150 Mercury

    all merc/mariner 2.0, 2.4, 2.5 V6 gearcase from 1976 up will interchange......
  12. Dukedog

    1988 Merc 200 HP Smoking during warmup.

    this is a good one...... "Pennzoil Marine Premium Plus" also tha "Pennzoil" full synthetic" if you can find it! they also put out a very "sweet smell".......... makes ya think "race track!"
  13. Dukedog

    1986 power head source

    jfyi.. merc "letter" info for shaft lengths.. XXL..... 30" XL........ 25" L........... 20" S........... 15" high performance offshore on V6
  14. Dukedog

    What Force by merc lower unit will fit my 1985 150 Mercury

    first off force didn't offer a 150 till '89.. don't think "anything" force will work ona V6 merc...... jmo.
  15. Dukedog

    1996 Mercury 200 hitting rev limit

    trash tha "idle" speed box.. it has white/black, white/red wires going to tha switch boxes.. you may have to make a short white/black jumper that goes between tha bias post of both switch boxes.. reset "max timing" at 23*... if that doesn't help ya probably gonna have a suspect ecu............ jmo.
  16. Dukedog

    1986 power head source

    justa 'bout everything BUT block half, pistons, rings, center main bearings (different crank) .. as for everything else ya gotta know tha difference, but can be used.. tha 150 is a 2.0 steel sleeve motor and your 175 is a 2.4 chrome (same as 200) bore motor which is tha MAIN difference
  17. Dukedog

    1986 power head source

    Bass Boat Central, Scream and Fly, Face Book (high performance boating), Chris Carson Marine (Florida)... you may have to go up or down (150 to 200) on horse power and size (2.0 to 2.5) for a replacement?.. jus do ya research on anything, anyone ya might find!!!.. lotta butt-heads out there now...
  18. Dukedog

    1988 Merc 200 HP Smoking during warmup.

    normal for older mercs... try a blend or full synthetic.. smoke is good!..
  19. Dukedog

    275 mercury 2 stroke

    Genuine Mercury & Mercruiser parts. 398-9610A22 STATOR Genuine OEM Mercury Marine-Mercruiser part
  20. Dukedog

    275 mercury 2 stroke

    i'm still wonderin' why merc did't put electrical part values in that manual..??? its got to be tha only one that doesn't have 'em??? good luck with it.. (y)
Top