Search results

  1. Scott Danforth

    Boat Trailer Tail Lights

    for what its worth, GM has separated all the trailer circuits onto their own fuses years ago starting in the 90's. so keep spares in the glove box.
  2. Scott Danforth

    Winterize Engine That Won't Start

    Drain the block, exhaust, hoses, etc
  3. Scott Danforth

    350 MPI Winterize - Block Drain?

    Drain the system, make sure to verify all the drains have drained and are not plugged.
  4. Scott Danforth

    Big motoe + tiny transom

    most bass boats come with a 10 year hull warranty to the original owner, some come with a lifetime hull warranty. unfortunately the warranty is non-transferable in many cases. Have a former co-worker that fishes BASS tourneys and is on the third hull under the factory supplied 250hp from...
  5. Scott Danforth

    Engine Zinc Anodes

    No, just the ones on the drive. would have to look at the parts breakdown, however I am not seeing anything at a quick glance.
  6. Scott Danforth

    Engine Zinc Anodes

    if you have them, they will be in the heat exchanger. some of the VP power steering coolers may have one
  7. Scott Danforth

    Need Help & Advice on a Purchase....

    based on the motor photos, I would go with the VP in the four winns
  8. Scott Danforth

    Need Help & Advice on a Purchase....

    isnt the crownline a bow rider and the four winns a pocket cruiser? for having kids, etc, I would go for a bow rider. for weekends with the wife, I would go with the pocket cruiser. a 5.0 anything is a bit small pushing a 24 ft boat
  9. Scott Danforth

    Carter P4389 Doesn't Work when Connected to Carburetor

    If the Carter pump moves fuel into a bucket, it will pump to the carb.
  10. Scott Danforth

    Spray of water from exhaust manifold above O2 sensor

    The downside to exhaust manifolds......If it's leaking on the outside...... It's leaking on the inside
  11. Scott Danforth

    Bottom paint

    You don't leave it in the water cor more than a day
  12. Scott Danforth

    Grill on Pontoon

    Or add another pedestal mount
  13. Scott Danforth

    Making new dashes for an old Caravelle, should I keep the molds?

    Agreed, there is no market. If you want to end up with a small fortune restoring boats, start with a large fortune to apply towards the boat.
  14. Scott Danforth

    Grill on Pontoon

    They make the pedestal mounts for tables /seats/grills.
  15. Scott Danforth

    1992 Mercury Force 9.9 - No Thermostat? Help please.

    Many small motors do not have a thermostat Yes, water pumps have gotten expensive the last few years
  16. Scott Danforth

    Bottom paint

    1-part top side paint is only good for a few days under water. Gel is what I would do on the bottom. And then boat wax to wax the hull to keep growth at bay. However if you are going to use a 1-part paint, I would recommend bottom paint (easy to apply, not aesthetically pleasing)
  17. Scott Danforth

    Removing regret

    It's also only 2 degrees in Minnesota.......not much vaporization
  18. Scott Danforth

    Bottom paint

    Depends on what water it will be in. If it's fresh water, wax is all you need
Top