Search results

  1. dingbat

    25 seapro 2 stroke - Oil/ fuel in water

    Could be.. It’s typically the result of the motor not getting up to temperature. My 200 HP does the same thing after a day of trolling in cold water. Goes way once water temps raise up a bit
  2. dingbat

    trailer tires

    What size tires you running now? My new #7450 GVWR (#6,000) trailer came with 215 75R14 Kendra Load Stars. C rated at #1870
  3. dingbat

    bilge problem

    Must have NVRAM like most computerized things. They saved 50 cents going with the power requirement
  4. dingbat

    Aerator water Pump & drain overflow port.

    Guess I didn’t understand your question. My over flow goes out a thru hull in the wall of the tank. To drain the tank I simply pull the plug. Sounds like you have to unscrew the stand pipe to drain completely
  5. dingbat

    How do you guys mix Gas

    That was 40 some years ago…. Fuel and oil formulations are very different now. Synthetics, semi-synthetic and heavy solvent loads (ease of mixing and injector use) were not the norm back then. Some oil brands have now gone as far as to advertise their oil’s “self mixing” qualities
  6. dingbat

    Aerator water Pump & drain overflow port.

    Put a cycle timer on the pump
  7. dingbat

    bilge problem

    They don’t “require” anything. It’s your choice to power memory or not.
  8. dingbat

    Random

    You’re very lucky. Here in Maryland it takes all of 3 minutes as well but my total came out to $161.50 for two years
  9. dingbat

    FELL Marine MOB+ Install

    This will be season 4. Had an auto-tether before this. Worked ok but not ideal. No regrets. Works as advertised. I’m free to roam about the cockpit
  10. dingbat

    Aerator water Pump & drain overflow port.

    The size of the body of water had nothing to do with pressure. It’s all about the drain relative to the water line. If the drain is below the water line you will have to wait until you trailer the boat. If the drain is above the water line like mine, it drains when you pull the plug
  11. dingbat

    FELL Marine MOB+ Install

    I have a kill switch built into the ignition switch but it’s useless if I’m up and about. Left the ignition intact and simply wired the MOB to the fuse panel at the helm. Wired in series with the kill switch in the ignition. Unit only draws 2.5W so the current drain is insignificant.
  12. dingbat

    White smoke?

    Pull a plug. If it’s “clean” you have a water problem. Typically a head gasket
  13. dingbat

    How to actually BOOK a flight online?

    Where are you trying to fly out of? Quick search turned up a bunch of flights between $1,600 -$1,800 RT from my local airport DCA
  14. dingbat

    How do you guys mix Gas

    Unlike the past when high viscosity motor oils where used, todays two stroke oils are designed with a low viscosity to allow the oil to be mixed with gasoline quite easily. One only needs to combine the two products with light agitation to mix the two My boat is injected, but when mixing fuel...
  15. dingbat

    Manual Bilge Pump Switch Not Working When Auto Float Wire Connected

  16. dingbat

    How to actually BOOK a flight online?

    I travel for a living. You will not get better flights or prices going with a third party booking service. I book everything direct using my Southwest or Untied app. Simple, quick and easy. International flights are cheapest at 60 days. Prices go up as the seats fill up. Traveling during...
  17. dingbat

    bilge problem

    Should be no parasitic drain at all if the boat is wired correctly, i.e. nothing but bilge pump(s) wired directly to battery. Both of my batteries are completely isolated from any load on the boat when I turn the battery switch to off.
  18. dingbat

    bilge problem

    Sensing consumption: 2.7 watts per day 18.9 watts per week 81 watts per month 972 watts per year If you have a problem starting the boat after consuming 81 watts in a month, your long over due for a new battery
  19. dingbat

    Bearing Hub won't slide on

    Spindle is fine..... Just need to file off the "ridges" that are keeping the bearing from sliding back on
  20. dingbat

    Topping off a compass, what to use?

    Had to replace the seals and refill mine a couple years ago. Turns out “Compass oil” is odorless mineral spirits. $8 a quart at the hardware store Fill and put in freezer for a couple of hours
View older results
Top