Search results

  1. tpenfield

    Volvo penta stalling help

    Without having the computer connected to the engine and recording data when the engines stall, it will be difficult to identify the problem. Not sure why you need to 'chop' the throttles, particularly around the docks. You probably should be engaging the gears at idle, not needing much more...
  2. tpenfield

    Ideal tongue weight?

    The highway will be really exciting . . . best to get the tongue weight to about 10% of your total weight. Probably around 350-400 lbs.
  3. tpenfield

    Boat weight

    It is a judgement call on your part (OP) if you are a bit over your weight rating to get the boat you want. Drive at or under the speed limit, but not over 55 mph regardless. I towed 14,000 lbs with my F-150 on the back roads - only about 2 miles. Probably would need an F-250 w/ dual rear...
  4. tpenfield

    How do I remove this stuck impeller key?

    Impeller usually has to come up first, and if stuck by the key, then pry/cut (carefully) as mentioned.
  5. tpenfield

    Owners manuals, schematics, etc.

    Boats don't come with much documentation or manuals. Typically a brochure about safety and not bumping into other boats. I'm not sure there is a Donzi owners forum (somewhere), but check the Interweb. The engine manuals, which are widely published, can be a good source for much of the wiring...
  6. tpenfield

    Won't go in park or reverse. Stuck in forward position

    The park lever is right next to the brake pedal. :ROFLMAO: I assume the OP means 'neutral' :unsure:
  7. tpenfield

    Boat weight

    As mentioned, published weights are the boat itself. You can do the math of adding the other stuff together, but @Scott Danforth 's figures are spot on. Often a boat purchase causes a tow vehicle purchase. 🤪 BTDT. You also want to be cognizant of your total vehicle weight capacity, which...
  8. tpenfield

    Need advice from experienced people.

    Folks aren't going to recommend to take short cuts. Since you will be tearing the engine down, you may as well do things right.
  9. tpenfield

    How smooth should hull be when tabbing in stringers

    There may be some unevenness, but as long as it has a fresh grind over it, you should be fine, as @zool indicated. I think some folks grind the hull more than needed.
  10. tpenfield

    Quit My Job . . .

    Yup, I entered the job market @ 22 years old, after college . . . so 44+ years doing the 9-5 thing (and then some). I've held 9 different jobs over that time . . . the longest stint had been 5 years, until my most recent job of 13 years. A career change along the way. I started out in...
  11. tpenfield

    Does this sound right? Mercruiser 4.3 Low Compression

    Mechanic is revenue focused, and probably not in your best interest. As the others have said, a cylinder leak test is warranted to further isolate the source of low compression. Most often it is a valve, but there are other possibilities. The cost should not be anywhere near the figure you...
  12. tpenfield

    DTC 113: IAT voltage high ( please help )

    This ^^^^^ Google "Volvo-Penta IAT" . . . You probably changed the wrong sensor.
  13. tpenfield

    Starting Issue After Unrelated Mech Repairs

    Maybe :unsure:
  14. tpenfield

    Quit My Job . . .

    66.5 was going to work until 69-70 ish, but decided to hang it up
  15. tpenfield

    Find us the right boat

    Both are good motors and for the boats that you will likely be considering, the engine itself are both sourced from GM. All the 'dressing' around them are specific to each manufacturer (Merc, V-P) For the boat that I just bought, I could have gotten a Volvo-Penta or a Merc . . . but my comfort...
  16. tpenfield

    Quit My Job . . .

    I probably won't take social security for a few more years, as the monthly amount that I can get will max out then. The Admiral is still working and will do so for those few more years. I have a honey do list a mile long and the new boat is keeping me plenty busy.
  17. tpenfield

    Quit My Job . . .

    Thanks, I hope all goes well with your plans. I would like to do some boat upholstery, since it is a skill that I've discovered, and I don't have to make a ton of money. It would be nice to have about 3 days per week of work and most of the summers off.
  18. tpenfield

    Find us the right boat

    More significant than the brand would be the current condition, since you will be looking at older boats. But poorly made boats do not get better with age. So, . . . From your list, I like Regal Wellcraft Monterey (Maybe) I'll add . . . Formula Chris Craft Sea Ray Cruisers Yacht Chaparral...
  19. tpenfield

    Starting Issue After Unrelated Mech Repairs

    Sorry to hear about the engine woes. My thoughts . . . not having read all of the prior comments. Not sure if you ever verified that the slave solenoids on the engines were actually making a good contact? (even though they were both 'clicking'). The ohm meter and the alligator clip wires can...
  20. tpenfield

    Four weens 1990 freedom throttle shifter

    Welcome to iBoats . . . It's Four Winns. And the throttle/shift controls would be per the engine, not the boat. I assume it probably has an OMC or Volvo-Penta engine?
Top