Search results

  1. alldodge

    2007 mercruiser 3.0 Rust by the looks of it on side of block cover

    Good, your SN is 0W607592 The hose would go from the valve cover fitting to a tang on the flame arrestor. Can see in pic of the like, the hose just slide over the tang and then motor sucks in the vapors when it's running https://www.mercruiserparts.com/863200-arrestor-flame
  2. alldodge

    2007 mercruiser 3.0 Rust by the looks of it on side of block cover

    Could use your motor serial number to make sure That hose normally gets connected to under the flame arrestor or right next to it. The motor sucks in air and the oil vapors get sucked in and burned. Looking at your flame arrestor it looks like it needs to be cleaned, it's looks black If you...
  3. alldodge

    2007 mercruiser 3.0 Rust by the looks of it on side of block cover

    Welcome I don't see an issue, looks like a bit of surface rust
  4. alldodge

    VHF antenna

    Best connection is a soldered connection. Twist lock is not as good
  5. alldodge

    Fuel pump doesn't pump

    Guess it's how you look at it. Web is saying vacuum pulses, your saying pressure pulses, and my original comment was thinking the same thing like a lawn mower. Either way thanks
  6. alldodge

    Fuel pump doesn't pump

    Operated by vacuum from piston, right?
  7. alldodge

    Fuel pump doesn't pump

    ok
  8. alldodge

    Launch Dolly for Mariner 4

    Welcome Here is one I found on youtube
  9. alldodge

    Fuel pump doesn't pump

    I the pump mounted in the correct position? Reason is my 125 has one pump and could be mounted "I think" higher and it would fit but hole doesn't go thru to exhaust. My 140 uses 2 pumps and there is a pump mounted in both places. Would need to go to the shop and look to verify
  10. alldodge

    1976 Montego 16- The "Free" Puppy

    Lets get some additional opinions but mine is a pinless meter is not much good on a boat. It has to read thru fiberglass and that doesn't work very well. Need one with pins and pins need to make it thru the glass
  11. alldodge

    Caddy XT5 Towing Capability

    Wife has the 2023 XT5 with V6, AWD and I like it. Don't tow anything with it and the 6 to 4 cylinder doesn't happen very often even without towing. My guess is it will never do it towing. It has to be on flat pavement and coasting for the most part. It won't go to 4 even going down hill I...
  12. alldodge

    Verado Gen5 Stales

    Good deal, thanks for coming back and letting us know
  13. alldodge

    Silenced .300 Blackout

    My buddy has all kinds of coyotes showing up and has all kinds of guns (why more then me) but cannot shot any of his guns at them. He has 60+ acres, horses, sheep, rabbits and dogs and dogs, horses go ape (wife no like) if a gun shot is heard. So I mentioned to him yesterday after seeing this...
  14. alldodge

    Maybe my turn for new boat time

    One forward and two back. Thought about mounting it in the head behind the helm but this will require me to drill about a 3/4 inch hole. Would need to go thru 2 walls (Helm and Head) with maybe 3/4 to 1 inch space between. Mounting it under the helm doesn't look good and the cable has a 90...
  15. alldodge

    1976 Montego 16- The "Free" Puppy

    Drilling is done on the inside using about 1/4 bit with tape on it so you don't go to deep Not being able to get to the transom makes it bad
  16. alldodge

    Silenced .300 Blackout

    It is amazingly quite but don't understand the $350 part. The gun can be had for $350 but add a suppressor and the $200 class 3 stamp and your way over that, unless you already have one
  17. alldodge

    Do GG Schmitt's L5T... telescoping over-platform ladders with links hang at an angle?

    The ladder is installed so the uprights lead against the swim platform. The platform is what keeps it tilled out and doesn't just fold under
  18. alldodge

    Maybe my turn for new boat time

    Thanks, that might happen in the future
  19. alldodge

    Maybe my turn for new boat time

    Could be, but since Chap is just good looking cheap crap from the outside. I'm thinking of doing what another did on Chap forum. He removed everything and made a custom panel to install things like he wanted My thought for later "if I stick with the boat" remove the entire helm, and make new...
  20. alldodge

    engine water leak (NOT Transom or Stern drive)

    Welcome That's port side rear Which 4.3 do you have, serial numbers are best? We at least need year, is at carb, EFI, MPI, closed or raw water cooled
Top