Search results

  1. alldodge

    Question please on angler boat i bought

    Never been on a Angler boat so have no first hand knowledge, but even the boats I have owned if piping needed to be replaced I could see where that may also be needed. Need to look, maybe there is access and pipes/hoses can be pulled thru from one location to another. If cutting is necessary...
  2. alldodge

    Question please on angler boat i bought

    Don't know what it would take to get to the pipes, but everything can be replaced it's just what has to be removed or cut to get at it
  3. alldodge

    350 Mag Bravo 3 with poor power steering assist

    Don't know of a kit kind of thing. Most cases is finding the fittings to connect to the gauge inline With no load on the cable and disconnected it's free, but under load it may be binding. with cable off try to resist the cable from moving while another turns the helm As Bt Doctur mentioned...
  4. alldodge

    2007 Vista 378 High Voltage

    Does you boat have a Gen, Bats with a inverter or combination of both?
  5. alldodge

    2007 Vista 378 High Voltage

    Volvo motors but does seem to be a Four Winns issue Might be a DC/DC converter issue. Have you contacted 4Wins for wiring diagrams or build sheets? https://www.fourwinns.com/us/contact
  6. alldodge

    battery charger alternative

    One 3 bank charger can charge the 3 you mentioned, or a 4 bank can charge all of them. Doesn't matter if 2 are in series
  7. alldodge

    Boat Loading Problem

    RL created an account then posted question ad has not been back since Doesn't matter what kind of winch he has "actually" or other if the winch is not above the bow eye. Manufacturer of my trailer mounted the winch below the eye, so guess what happened when I tried to winch it up? Something...
  8. alldodge

    6 year anniversary of quitting smoking, yay me!!!

    Congrats Come Veterans day it will be 35 years for me
  9. alldodge

    Wiring on a 50 hp 1973 evinrude

    Welcome I'm not an OB guy but have a look here for wiring diagrams https://maxrules.com/JOwireindex.php
  10. alldodge

    Question please on angler boat i bought

    Note: silly cone will not last
  11. alldodge

    350 Mag Bravo 3 with poor power steering assist

    Been looking for something that would advise and found nothing in manuals of Bulletins that I have. Finding nothing I went out to the shop and got the one on my shelf. It is hard to push the tube in either direction. I placed on the floor and there is a stiff spring in there which brings it...
  12. alldodge

    Need RPM’s on 383MPI 1970 SeaRay 24’ project

    HP ratings for a installed motor and one one the shelf Installed 320HP , measured at the prop On the shelf 360HP , measured at the flywheel Same motor
  13. alldodge

    Question please on angler boat i bought

    Welcome When a seller does anything to a boat and says something like that, I would say there is a problem. Don't know if it's a safety issue with live wells but probably means the pumps don't work
  14. alldodge

    Need RPM’s on 383MPI 1970 SeaRay 24’ project

    It should show hp, torque and time but the agree the chart is doesn't show much. Torque drops way off and HP climbs oposite, doesn't make since You cannot using the same harness, would have to change harness
  15. alldodge

    Need RPM’s on 383MPI 1970 SeaRay 24’ project

    This does clear things up Dyno with 2 barrel would have also used a different distributor Was the original distributor installed correctly I would scan the ECM, it could be it's retarding the timing because it's running lean Yes, that's the 555 and from just looking at your pic that's whaat...
  16. alldodge

    Thinking about an upgrade for the tow vehicle

    My 08 had the 4:10 and heavier springs (camper package) and talk about something that would pull. New one does ok, but the but not like the 08
  17. alldodge

    2007 Merc 5.0 TKS stalled at speed, had to be towed

    Dang
  18. alldodge

    Mechanical fuel pump gph question

    Motor was running fine above 3500 and now it's not. There is no backfiring it just won't go any faster Don't see it being the fuel pump, if it was the motor would start to back fire from running lean. I would do this as Scott mentioned
  19. alldodge

    battery charger alternative

    Yes you can do that, but don't use the little maintenance chargers to recharge the 2 Bats. Need to have a charger that puts out enough amps to recharge the Bat it the amount of time you allow
  20. alldodge

    1990 Mercruiser 4.3 Same As???

    Internal parts are the same "IF" you get a truck motor and not a car. Fuel pump and carb must be marine Brass or stainless freeze plugs and and marine head gasket (not auto type) Ignition must be marine except for coil
Top