Search results

  1. F

    Care to guess tire size?

    I think you are going to have a hard time getting on a car trailer.. and is going to be heavy
  2. F

    Care to guess tire size?

    From that angle looks like my boat. 21 foot reinell cuddy. I think my trailer tires are 215 75 14. I can check tomorrow
  3. F

    My boat is being a boat . . .

    Another go at the vacuum bag swim deck? Can you modify the formula buck
  4. F

    1974 reinell cuddy restore

    So went out Sunday, took all my diagnostic stuff with me just incase. Well.... got towed back in. I was able to determine gas was not getting to float bowl. Tore the whole fueling system apart to find nothing. Checked vent, no screen in pickup tube in tank, anti siphon (operates at 1 psi), New...
  5. F

    1962 Chris Craft Holiday 20’ bucket list resto

    I like 1/8 ply. Stiff enough to give you a feel of how it will follow compound curves
  6. F

    Best value pre-made fiberglass filler alternative to making Fiberglass PB

    H2o causes cancer in california
  7. F

    Best value pre-made fiberglass filler alternative to making Fiberglass PB

    I'm asbestos abatement trained and what you do almost sounds worse than what we do with double gooseneck bagging and the rest. When I mixed my cabosil I just was outside away from house w/respirator and mixed careful at first
  8. F

    1976 OMC stringer electric control box removal

    My controls are different. 1 for gas and 1 for fwd/n/Rev. Has the same switch though. I was able to get apart. Had to split the glued halves.... gently. Cleaned contacts and glued back together and then put some heat shrink around it. Now that I know the maker I might just buy one for a spare....
  9. F

    Cracked beam an issue?

    Looks like at least 3 of 4 of those are cracked. I would weld all indications then brace.
  10. F

    Thinking about converting surge brakes to electric - Tri-Axle Trailer

    Also FYI. Wdh's need specific types to work with surge brakes. Normal ones bind
  11. F

    5.7 Indmar Crazy Fuel Pressure

    Tank vent or suction tube plugged
  12. F

    How do I fill the intermediate housing?

    You would need a real small tube to fit down that small fill hole and would never know how much you really got out
  13. F

    Converting old log style to new center style manifolds

    Mine are Barr Marine. I would call them and see if they have complete kits. The water passages are Larger than the stock ones so they don't plug as fast
  14. F

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    Slow and steady wins THE race..... Mickey wins the season
  15. F

    How do I fill the intermediate housing?

    That's more like a early 70's. As for oil.. I sucked it out with a big syringe and then blew the rest out with compressed air and a bunch of rags to manage spray. Then I flushed it with brakeclean, then air again to dry. I wanted to get it as clean as possible because it had a bit of water in...
  16. F

    How do I fill the intermediate housing?

    It's at 12:00 just next to big rubber gasket where intermediate goes thru hull
  17. F

    How do I fill the intermediate housing?

    There is a rectangular cap Inside boat. I removed cap and sucked all the old oil out from there
  18. F

    1974 reinell cuddy restore

    New starter solenoid and new coil/ballast resistor. Took it out Sunday and even though I didn't run it hard for any real time it didn't fail. Trip was cut short due to thunderstorms and can't go out this weekend because they expect the possibility of 4+" of rain
  19. F

    Trailer winch bow anchor repair

    Possible damage was from a long tow?
  20. F

    Everything done but low rpm at WOT. Distributor spring?

    Here is a dumb question... Have you weighed the boat. Is it possible you got water under deck and have a heavy boat???
Top