Search results

  1. Bondo

    riser and manifold replacement

    Ayuh,..... Welcome Aboard,..... 1st, you have to clean the castin's to bare metal, to see how much is left,.....
  2. Bondo

    Omc 5.7 ignition timing

    Ayuh,..... That usually means it's runnin' Lean,..... Put the timin' back where it belongs, or you'll have holes in the pistons,..... Both a lean condition, 'n/ or advanced timin' will induce detonation, 'n hole the pistons,....
  3. Bondo

    Omc 5.7 smells like gas in oil

    Ayuh,..... Bring it back to 'em,..... They got the valves too tight,.....
  4. Bondo

    1995 OMC 5.0L emergency kill switch

    Ayuh,..... The "Kill switch" has nothin' to do with the "Start" circuit,..... It cuts off the "Ignition" circuit,..... The neutral safety switch, interrupts the "Start" circuit,..... 'n both switches are usually just 2 wires to make, or break the circuit,.....
  5. Bondo

    Temporarily repair toon logs.

    Ayuh,..... Find somebody that can weld it,.....
  6. Bondo

    Wanted: canvas for 1977 15' Starcraft Marine Holiday (original or fitted replacement).

    Ayuh,.... Welcome Aboard,..... Take it to 'bout any canvas or upholstery shop, 'n they'll make ya a brand new one,....
  7. Bondo

    454 carb question

    Ayuh,.... Yer carb should be the Qudrajet, or possibly the Merc/ Weber AFB,..... Both can develop float bowl leaks, which yer symptoms says is happenin',.... A carb rebuild should fix the issue,.... The bowl leaks can be dealt with at the same time,....
  8. Bondo

    Shifting issues alpha 1 gen 1

    Ayuh,.... Welcome Aboard,.... In that case, it's probably time to replace the lower shift cable,.....
  9. Bondo

    Trim Operation Question

    Ayuh,..... As Scott said, at full Up, the pump can be heard in overload, as it labors,.... At full down, it by-passes, 'n sings at a higher note, unloaded,....
  10. Bondo

    Need help on changing every wire on my sterdrive engine

    Ayuh,..... The most common part number is NLA,....
  11. Bondo

    Dt55 ignition

    Ayuh,..... Welcome Aboard,.... What's a dt55,..??
  12. Bondo

    SX175 Stiff Steering

    Ayuh,.... Welcome Aboard,.... I believe This, ^^^, is the right direction,....
  13. Bondo

    1989 3.0 Manifold (OMC)

    Well, seein's there is no OMC anymore, yer probably gonna have to hunt down a used one,..... There's a couple of aftermarket outfits that may, or may not offer a replacement,.... Barr is one of 'em,.... A Merc manifold is different, Volvo, I don't know whether it could be adapted,...
  14. Bondo

    Need to know about the 1980 Volvo AQ145A Engine

    WOW,.!.!..!. Drop the 1 at the beginin' is closer to what it's worth,.... :rolleyes:
  15. Bondo

    1989 3.0 Manifold (OMC)

    Ayuh,.... Welcome Aboard,.... Is yer's freeze cracked or broken,..?? Or is it just rusty, 'n filthy dirty,..??
  16. Bondo

    no gas in the fuel line before and after the pump

    Ayuh,..... Welcome Aboard,..... If the carb is fulla gas, the seat is closed, 'n no gas will be pumped,..... When you actuate the throttle, is the carb sprayin' gas down the throat,..?? When you try to start it, after it won't start, are the spark plugs wet, or dry,..?? Are you pumpin' the...
  17. Bondo

    Connect boat to house line

    Ayuh,..... Welcome Aboard,..... Need much more details to help,....
  18. Bondo

    Need help on changing every wire on my sterdrive engine

    Ayuh,.... They've got a thread in the Merc section, with multiple problems goin' on,.... I'd wanta hear it run, before ya start dumpin' cash into it,....
  19. Bondo

    Waterproof engine compartment?

    Ayuh,.... Or upholstery/ tarp vinyl,....
  20. Bondo

    Mercruiser were 4.3 MPI first run of the season question

    Oh,.... I haven't looked in quite awhile,....... Obviously,..... :rolleyes:
Top