Search results

  1. tpenfield

    Classic boat pic gallery (20yr and older)

    Re: Classic boat pic gallery (20yr and older) Just a bit over 20 years old . . . now that it is 2012. Here is my 1991 Formula 242SS
  2. tpenfield

    SAE J1171 Tags on Aftermarket parts . . .

    I have a nagging question regarding some of the components on my Mercruiser 7.4L (1991 vintage). (Boat = Formula 242SS) Here is a little background . . . The Previous Owner had the boat professionally maintained at a reputable marina. 13 years of ownership I have owned the boat for 7 years...
  3. tpenfield

    Electrical Issue 2007 Mercruiser 4.3 inboard outboard e

    Re: Electrical Issue 2007 Mercruiser 4.3 inboard outboard e Yes, everything is pointing to a bad solenoid. Since you jumped the solenoid and the engine cranked you can assume that the starter solenoid is good and the slave is the bum. FWIW here is a pic of the connections to the starter. The...
  4. tpenfield

    What's your boat speed?

    Re: What's your boat speed? WOT = 50 mph (gps) Cruise at 28 - 32 mph
  5. tpenfield

    Happy New Year!!!

    Sending out my wishes for a Happy New Year to all. I've been participating in this forum for only about 4-5 months now, but it has been quite interesting and enjoyable. I hope that I have been able to share my knowledge with others, and I have certainly learned some things as well. Also, just...
  6. tpenfield

    quick volvo engine question

    Re: quick volvo engine question My engine is staying in the garage for the winter . . . all oiled up, fogged, drained and kept relatively warm. I'd do everything you can to keep your freshly rebuilt engine protected. (my apologies for posting a picture of a Mercuiser in the V-P forum :p )
  7. tpenfield

    Apple MacBook Failure Rate ???

    There are 3 Apple MacBook Pro computers in my household (me & 2 college kids) 2 of the 3 computers has needed a repair over the last year - none of the computers are more than 2 years old. 1 of the 2 that failed is going inot the "Genius Bar" tonight for yet another probable repair. Of...
  8. tpenfield

    Newbie Needs Some adivice on Maintanence

    Re: Newbie Needs Some adivice on Maintanence It all sounds good. The tough thing is where you are it could get to freezing quickly, so you have to winterize when not in use. I (also} would recommend draining everything (water) from the engine after each winter use, since you could use it...
  9. tpenfield

    Mercruiser 7.4L compression test after valve job

    I have done a few bench test runs of my 1991 Mercruiser 454 (7.4L) after getting all back together from the valve job and general refurbishment. Yesterday, I did a compression test to compare the results from before the valve job. Here are the 'before & after' results and fancy graph in the...
  10. tpenfield

    How to set up Mercruiser 7.4L for Bench Testing after rebuild ???

    Re: How to set up Mercruiser 7.4L for Bench Testing after rebuild ??? Engine assembly is done . . . Getting ready to fire it up . . . maybe today if I can get some dollies to wheel it out of the garage. I figured that I would hook up a 12 light to the oil pressure alarm sensor just to...
  11. tpenfield

    How to set up Mercruiser 7.4L for Bench Testing after rebuild ???

    Re: How to set up Mercruiser 7.4L for Bench Testing after rebuild ??? Thank you for the replies . . . looks like the set up should be fairly simple. The engine is sitting on cinder blocks, but I was planning on putting some dollies underneath them to move the engine out of the garage into open...
  12. tpenfield

    How to set up Mercruiser 7.4L for Bench Testing after rebuild ???

    I am nearing the completion of a valve job and refurb. on my 1991 Mercruiser 7.4L. I removed the engine to do all this and now it sits in my garage - soon to be ready. I plan on running the engine *before* I put it back in the boat to check things out. In looking at the wiring diagram for the...
  13. tpenfield

    Winter Layup Survey . . . Gas Tank 'Empty' or 'Full'

    This question comes up occassionally during the winterization season . . . Of those who have built-in tanks in their boats, and prep them for winter. . . Who goes with the 'Tank Full' approach? Who goes with the 'Tank Empty' approach? Just wondering . . . . :)
  14. tpenfield

    Mercruiser 454 tear-down - pulled the heads off - rusty exhaust ports

    Re: Mercruiser 454 tear-down - pulled the heads off - rusty exhaust ports Here are a few more pics . . . I'm still waiting for some gaskets and related parts to arrive so that I can re-assemble the heads.
  15. tpenfield

    Mercruiser 454 tear-down - pulled the heads off - rusty exhaust ports

    Re: Mercruiser 454 tear-down - pulled the heads off - rusty exhaust ports Just an update on this thread, since it has been a while. . . I'll post some pictures as well. . . Problems/Issues found: Rusty/pitted valve seats on #4 exhaust and #5 exhaust. I had a machine shop install new valve...
  16. tpenfield

    Building Thru--Bolt Motor Mount Stringers

    Re: Building Thru--Bolt Motor Mount Stringers OK, a couple of things now that I see the pictures . . . Your rear mounts should be only at the transom plate once you re-install the outdrive related 'stuff'. The front mounts are where you installed the steel plate as a temporary solution...
  17. tpenfield

    Building Thru--Bolt Motor Mount Stringers

    Re: Building Thru--Bolt Motor Mount Stringers John: A picture would be good, but I agree with "oops" post. Use the rear mounts on the transom plate as your guide. Also, the front mounts that attach to the engine block should have some up/down adjustment; about 1" +/-. The mounts that attach...
  18. tpenfield

    How to tell if a bolt is a Torque-to-Yield (TTY) head bolt ???

    I am wondering if there is a definitive way to tell if a head bolt is a 'TTY' bolt versus a 'standard' head bolt just by looking at the bolt. Does anyone know if there are special markings on the bolts or what?
  19. tpenfield

    I Should Finish Winterizing . . .

    Winter arrived on the east coast yesterday. I had great plans of winterizing today. Looks like I'll have to dig through a little bit of snow first. :rolleyes: Good thing I brought the engine inside a few weeks ago. . . .
  20. tpenfield

    Mercruiser 7.4L GM 454 Gen IV or Gen V ?

    As you may know from some of my previous posts, I am doing a top end rebuild of my 1991 Mercruiser 7.4L. That year is kind of on the border line between the "Gen IV" and the "Gen V" 454 versions. As best I can tell, the engine is a "Gen IV". It has an engine code on the block of T04060XW which...
View older results
Top