Search results

  1. Scott Danforth

    Happy Halloween iboaters!

    I'm dressed as the grumpy old guy in the neighborhood
  2. Scott Danforth

    Pumping out oil from dipstick

    Non issue. You can't generate enough vacuum at enough volume to ever have it be an issue. If you had a 300hp diesel powered vacuum pump, the most you would do is collapse the hose
  3. Scott Danforth

    1999 Chaparral Sunesta 232 VP sx duoprop

    No o-rings, just sealant
  4. Scott Danforth

    Need replacement windshield for 2003 Lund Pro V

    You call them
  5. Scott Danforth

    Need replacement windshield for 2003 Lund Pro V

    https://www.taylormadeproducts.com/products/boat-maintenance/windshield-parts/
  6. Scott Danforth

    OMC vs Volvo drives

    Uhhhh why would you say that?
  7. Scott Danforth

    2013 Mercruiser 3.0 MPI (engine rebuild)

    they all use the same 10 pin connector. the wiring is the easiest part of the swap.
  8. Scott Danforth

    1999 Chaparral Sunesta 232 VP sx duoprop

    are you talking the 6 transom bolts that bolt the shield to the transom, or the 6 bolts that bolt the drive to the bellhousing? transom bolts us 5200 on the inside to seal the 6 holes. no seals or sealant on the 6 bellhousing bolts.
  9. Scott Danforth

    Exhaust Bellow

    on the other hand, if the rubber was rotten, your other two bellows are probably needing changing as well.
  10. Scott Danforth

    Tapping noise when turning

    I personally would recommend that you do the work yourself
  11. Scott Danforth

    Tapping noise when turning

    Anything is possible.
  12. Scott Danforth

    v378 horn compressor location

    Are you sure it's an air horn?
  13. Scott Danforth

    Tapping noise when turning

    Pull drive, inspect alignment and u-joints
  14. Scott Danforth

    Glastron tandem axle boat trailer question

    Contact glastron with your trailer VIN for a parts breakdown or do research on sites listed above
  15. Scott Danforth

    Alternator

    Looks like a bad knockoff from China.
  16. Scott Danforth

    Fogging thru carburetor

    Nah.....just grumpy
  17. Scott Danforth

    Which hull brands to avoid

    Buy one between 5-10 years if you want a quality interior. Or have the interior redone Vinyls after 2004 no longer have arsenic as the anti-fungal and they tend to suffer pinking. Regarding hulls, Bayliner and SeaRay after 2002 and under 25 foot come from the exact same building Avoid...
  18. Scott Danforth

    . . . and I Thought Hi-tech Boat Engines Were Bad . . .

    OK, who thinks that step 1 of a starter R&R should be removed the fender liner and work blindly?
  19. Scott Danforth

    Need ideas on problem with 5.7L Mercruiser shutting down

    Shutting down is one issue Not charging is a separate issue
  20. Scott Danforth

    Need ideas on problem with 5.7L Mercruiser shutting down

    Not charging is a completely different issue.
Top