Search results

  1. JASinIL2006

    Chopstran is clumpy. Is this an issue when putting on the regular fiberglass?

    I’d grind out the clumps and re-glass. I’m not a bug fan if epoxy under the fiberglass, as poly resin doesn’t stick that well to epoxy. I’d also consider grinding back the gelcoat in areas around your transom core. When you tab in that area, you want the new glass to adhere to the old glass...
  2. JASinIL2006

    cooking

    That's the best way to get a lovely crust! I do that sometimes when I cook steaks sous vide with an immersion cooker. It's hard to beat the flavor!
  3. JASinIL2006

    Any Transom experts here. I have a Transom Rebuilding Question.

    Should be fine. I 'glassed during the winter in a garage heated with space heaters. You resin will kick off fine. Keep up the progress!
  4. JASinIL2006

    new to me 97 ski sanger dlx 20 stringer movement near stern

    Have you drilled any test holes in the wood structure to see if you have good wood or rotten mush? That would be a place to start, before making plans to repair the loose stringer.
  5. JASinIL2006

    How to video cavitation plate on the water

    GoPro? Cell phone on a (long) selfie stick?
  6. JASinIL2006

    new to me 97 ski sanger dlx 20 stringer movement near stern

    I personally wouldn't use the boat and I wouldn't take anyone out on the boat, unless they signed a liability waiver. If your stringer is that bad, who knows what other structure is compromised?
  7. JASinIL2006

    Trailer Brakes

    I have a very hard time believing the “I phone folks” would accept a manufacturer with an 80% failure rate. That is not believable.
  8. JASinIL2006

    Trailer guides with step in the way

    Poles are OK if you just need a visual indicator of where the back of the trailer is. They don’t work very well as bumpers to help guide the boat onto the trailer in windy or heavy current conditions; they bend pretty easily if the boat whacks into them. If you’re looking for something to help...
  9. JASinIL2006

    Pet surgery cost😮

    I’ve seen this recommended by vets to help choose pet insurance: https://www.pawlicy.com/
  10. JASinIL2006

    Dock question: how do these sections hook together?

    Actually, the more I think about it... if that's not a floating dock, it might be that those hooks are really all that hold the sections together.
  11. JASinIL2006

    Dock question: how do these sections hook together?

    It looks like once the sections were joined together using that hook thingy, that you could reach the holes (by standing beside the dock) that are adjacent to the hooks to attach the sections more securely using whatever hardware one uses with that kind of dock.
  12. JASinIL2006

    Dock question: how do these sections hook together?

    Does that hole next to the witness mark serve any purpose? I'm wondering if the sections get loosely bolted together. It seems that if the dock is held together only with that angled hook section, a bit of rough water could easily cause the sections to separate.
  13. JASinIL2006

    Awfull time launch & retrieve roller trailer

    Spray silicone might have the same effect with less environmental impact.
  14. JASinIL2006

    Any Transom experts here. I have a Transom Rebuilding Question.

    I have one of those for my table saw. They work great.
  15. JASinIL2006

    Any Transom experts here. I have a Transom Rebuilding Question.

    Personally, I'd just slap some PB in there with a 3" putty knife and then smooth the fillet using a large spoon. (Buy one at the Dollar Store.) I suppose a caulking tube would work, but that sounds like a messy pain in the behind to me. One helpful tip for smoothing fillets: after you have...
  16. JASinIL2006

    Any Transom experts here. I have a Transom Rebuilding Question.

    It's a bit late, but the things you want to make sure are: 1. Thickness of transom (transom core + fiberglass + peanut butter) is between 2" and 2.25" 2. The exterior of the transom (where the gimbal housing meets the exterior of the hull) is perfectly flat top to bottom and side to side. 3...
  17. JASinIL2006

    Any Transom experts here. I have a Transom Rebuilding Question.

    I used a small heater to keep temps above 70. Cooler temps will definitely affect curing time.
  18. JASinIL2006

    Bought my first boat to cut, gut and rebuild from bow to stern, including engine. Killed my back and suffered the wrath of the fiberglass demons

    I know I used at least 20 gallons of resin, and I didn't have to do my stringers.
  19. JASinIL2006

    Thru hull

    MarineTex (or PC11) or 4200. I would never use silivone.
  20. JASinIL2006

    dash cams

    This may have more features than you need, but it is very highly recommended on a truck forum I frequent. https://a.co/d/jjIJKss
Top