Search results

  1. JASinIL2006

    Is a Tiny Tach a good choice for testing?

    MyTiny Tach is great. Cheap and accurate.
  2. JASinIL2006

    Pre-project fiberglass boat structural repair planning questions

    Personally, I would get as much removal and grinding as possible during cool/cold weather. Doing the demo work when it’s warm out is really not much fun, especially when you’re wearing full Tyvek suit, respirator, rubber, gloves, etc.. Building a secure frame, so you can cover your boat during...
  3. JASinIL2006

    99 Monterey 276 Transom Replacement

    Sorry you found rot, but good on you for taking care of it properly! You are in the right place for help.
  4. JASinIL2006

    Best value pre-made fiberglass filler alternative to making Fiberglass PB

    I did my fiberglassing in my garage, so I mixed Cabosil into the uncatalyzed resin outside, so there was no free-floating Cabosil to worry about. I mixed in the MEKP last, so I didn't need to worry about the mixture kicking off while I was fiddling to get the proportion of chopped strand and...
  5. JASinIL2006

    Caliber Bunk Wraps

    Seems like spraying the bottoms with rubber is only likely to trap moisture and lead to rot. I would think leaving the wood bare would allow it to dry more quickly.
  6. JASinIL2006

    Tire and Loading Info

    That is correct. From the owners manual for my 2019 F150: Payload is the combined weight of cargo and passengers that your vehicle is carrying. The maximum payload for your vehicle appears on the Tire and Loading label. The label is either on the B-pillar or the edge of the driver door...
  7. JASinIL2006

    Tire and Loading Info

    The payload rating (occupants plus gear) sounds about right for a 250. Changing tires won’t change the suspension, drivetrain, etc. If the sticker says 1961 pounds, that is what the truck is rated for.
  8. JASinIL2006

    Thinking about converting surge brakes to electric - Tri-Axle Trailer

    My breakaway battery only supplies power when the pin is pulled (i.e., when the trailer has broken loose from the truck). Otherwise, it does nothing but receive a charge when truck is running.
  9. JASinIL2006

    Confusion

    Not all of us are too enthusiastic about using PT wood in boat construction. In addition to the problems with PT plywood and lumber requiring extensively long drying times before it can be glassed, I worry that if it does get wet in the future, it may leach chemicals that could be corrosive to...
  10. JASinIL2006

    Need Advice on Towing Performance

    Other than the ideas re: the prop, something that might help is something like SmartTabs. My boat isn't underpowered but it would have difficulty holding plane at the lower ranges of tubing speed (18-20 mph). Once I got up to 22-23 mph, it planed fine. Adding SmartTabs force the bow down enough...
  11. JASinIL2006

    Combo trailer for 1 boat and 2 skis

    That's pretty creative! Nice work! Did you take any steps to avoid corrosion at the spot where the galvanized channel and aluminum frame come in contact?
  12. JASinIL2006

    Boat info appreciated

    If you are new to boating, please take a boating class. In-person classes are best, but even an online course will give you lots of information on how to operate your boat and do it safely. If you're lucky, you might have a buddy who is a boater who can take you out and teach you how to operate...
  13. JASinIL2006

    Boat construction question on gelcoated underdeck surfaces

    I think it depends on the boat, and when it was made. My boat has fiberglass stringers that were gel coated, but they pretty clearly were made separately from the whole, and then we’re tabbed in and filled with foam. Some newer designs may have them as an integral part of the hall.
  14. JASinIL2006

    Transom and floor replacement

    Your goal should be to rebuild it better than it was when it came out of the factory. (That's not hard to do, for many of our boats...) There is much good info here to help you, and many patient folks to answer your questions along the way. As @Scott Danforth noted, it does look like your...
  15. JASinIL2006

    Illinois registration numbers?

    Yup... I'm in Illinois, too. The card with your registration should have instructions, but the booklet in the link from @tpenfield shows it, too. I don't think Illinois sends out reminder notices to renew your reg anymore, so you need to make sure you remember in a couple years to renew.
  16. JASinIL2006

    Raw water pump kit differences

    I agree. The water pump is not something to scrimp on.
  17. JASinIL2006

    Old timey runabout?

    A couple friends of mine recently purchased a lakefront cottage on a small lake. They would really like to find an old vintage run about like the one in the picture below. Other than craigslist and Facebook marketplace, any thoughts on where to find one? It doesn’t matter if it needs some work...
  18. JASinIL2006

    Possible buy (engine option)?

    I'm pretty sure @tpenfield had a Formula 242... I'd be concerned about a boat that size being underpowered with a 350 Mag. Also, I have a hard time believing an '87 was built without wood.
  19. JASinIL2006

    99 Monterey 276 Transom Replacement

    Sounding test is worthless unless the boat is completely rotted away or you are highly experienced at examining boats. Drilling core samples from inside is a MUCH more reliable way to check for rot.
  20. JASinIL2006

    Flex Seal on a Leaky Aluminum Boat?

    Gluvit works great. Just be sure to cover it with a coat of paint to protect it from UV.
Top