Search results

  1. 9

    Suzuki dt 25 cooling problems

    no that is not normal
  2. 9

    Suzuki dt 25 cooling problems

    possibly someting is plugging/restricting the flow to the Tell tale. have you tried to blow compressed air into the TT hole while this happens to see if that changes things up?
  3. 9

    90s Yamaha 85hp 2 stroke misfiring

    a timing light hooked to the plug wires will show if timing is out of spec and also show if spark is not getting to the plugs when this is happening
  4. 9

    Overheating

    since it is not filling the block at low RPM, you need to find out where the water is going if the pump is pumping as it should Make sure the pump is pumping as it should. replace the pump housing if any signs of warpage or other problems. make sure all gaskets and seals are in place so that...
  5. 9

    Overheating

    blockage or restriction in cooling passages would be my guess
  6. 9

    1991 Yamaha 30 hp

    check the part numbers to see if they match
  7. 9

    Yamaha 200ETXN 1984 Stator Values

    ignition coil secondary is going to the spark plug
  8. 9

    Suzuki Cooling System

    did you replace the housing itself?
  9. 9

    yamaha 9.9 ELRX won't idle

    thanks for the update, let us know if you even figure out what bent those valves
  10. 9

    New Yamaha F25 problem

    take it in to have it checked out
  11. 9

    Yamaha 200ETXN 1984 Stator Values

    also when you read the stuff on testing I am sure it mentioned peak voltages, read with a special meter for these systems, or a regular meter with a DVA adapter so you can compare to the minimum specs
  12. 9

    New Yamaha F25 problem

    worry about that if they do not find a problem. could be bad gas, and they will not cover bad gas
  13. 9

    yahama 50 hp 2 cycle

    If that 50 is like my 40, one temp switch tells the CDI the motor has warmed up after a cold start and the other tells the CDI the motor is overheated. need to make sure you are grounding the proper one
  14. 9

    yamaha 9.9 ELRX won't idle

    If the compression ,valve timing, and ignition timing are all in spec, You might need to get these carb parts into a heated sonic cleaner to help get rid of some stuff you have not been able to get out already, I would still like to know what bent the valves. Something had to hit to cause that...
  15. 9

    yamaha 9.9 ELRX won't idle

    have you checked compression to make sure the cylinders are sealing well? I have no clue how an intake valve could get bent, except hitting the piston or some other hard object. are you sure the timing is all set up properly
  16. 9

    tiller problems

    do a google search for the part number for # 10 to see what you find. if you cannot find that part on this web site we are using
  17. 9

    tiller problems

    so you do not know if you have a 2 or 4 stroke motor, or what year it was built or what the model number is? did you steal this motor from someone? seems paper work would have some info if you bought it
  18. 9

    yamaha outboard out of oxygen

    and possibly no salt water environment
  19. 9

    Yamaha 50

    a 40 ELHS would be a 1994 need to figure out what sticked if fake and I have never heard of a 50ILRH also 1st letter needs to be a E M P, or T
  20. 9

    Yamaha 50 2 stroke rebuild questions

    Took a little while, but I found it. Carolina Tool and Machine in Wilmington NC
Top