Search results

  1. Scott Danforth

    All gauges went out. What to look for?

    your issue could be a half dozen common wiring issues. you wont know until you get there. the purple wire from the ignition switch is the power. the black wire from the ground buss is the ground. the blue wire from the nav light switch is the lights
  2. Scott Danforth

    Original Interior Vinyl Colors Used on 2007 Larson Senza 226

    Could always use web archive dot org and look at old sales brochure. However there are better vinyls. See your local upholstery shop.
  3. Scott Danforth

    My 2015 grand dodge grand 's towing capacity

    A 2900# boat with a 800-1200# trailer, 300# of fuel, and 600# worth of batteries, oil, anchor, gear is a bit over your 3600# max towing capacity Working backwards..... 3600# - 1200# trailer, -300# of fuel, - 600# of gear, etc leaves you with a 1400# boat (including motor)
  4. Scott Danforth

    1993 Stingray 556 Leak in Bilge

    Not to mention filling the boat with water not only adds a few thousand pounds to the trailer, it pushes water in areas it's not supposed to be
  5. Scott Danforth

    Very difficult to shift into Neutral

    You need the flex tool
  6. Scott Danforth

    Designs in or over gelcoat?

    Duratec is usually a 1:1 mix. However you have to test
  7. Scott Danforth

    Designs in or over gelcoat?

    Most likely yes. I usually sand 240, 320, 400,600,800, then grab the polishing compound
  8. Scott Danforth

    2000 Glastron 175 engine swap

    Add a carb spacer to fatten up the mid range and it will help a bit with the vic jr intake. If you do a lot of drive work to improve oiling, you could spin it faster
  9. Scott Danforth

    Volvo penta 3.0 water in the oil.

    Drain the water jacket and pressure test
  10. Scott Danforth

    1994 Mercrusier 4.3l engine compatability

    You ditch everything that is not the long block from the S-10 Your marine distributor will swap over fine. Your 94 should be Thunderbolt 4
  11. Scott Danforth

    Designs in or over gelcoat?

    Use the duratec 904 vs wax. Read the links I posted Can't use paint and gel. Your choice is all paints or all gel Gel requires a 1.8-2.3 tip
  12. Scott Danforth

    1993 Stingray 556 Leak in Bilge

    Look at your own video. They are front and center in the preview pic
  13. Scott Danforth

    Designs in or over gelcoat?

    The first thing you do is practice. Make sure you can even spray gell thru an airbrush. You have base color, then taping off and doing the fields, then the stripes, then your designs. Then hours of sanding, then touch-up, then clear, then hours of sanding, then polishing
  14. Scott Danforth

    1994 Mercrusier 4.3l engine compatability

    You have to pull the outdrive to pull the motor. Just put the outdrive in the basement
  15. Scott Danforth

    mercruser 888 wont rev past 2000 when in gear in the water

    I was partially joking when it comes to adding HP. However, yes. With the wrong gearing you need more motor (torque). A 671 would be overkill. A Magnuson 122 at 14psi would be plenty
  16. Scott Danforth

    1978 Lund Deep V Hull, bow raising up dangerously high

    Get a tiller extension and move your butt forward
  17. Scott Danforth

    1994 Mercrusier 4.3l engine compatability

    You need a vortec marine intake. All 4.3 exhaust manifolds are the same
  18. Scott Danforth

    1993 Stingray 556 Leak in Bilge

    There are 3 screws on the garboard plug flange. Do you really need a video to show you how to remove screws?
  19. Scott Danforth

    A need to vent moment

    Don't take it personally..... He's a butthead Got pics of your forge?
  20. Scott Danforth

    mercruser 888 wont rev past 2000 when in gear in the water

    Could bolt a 671 on top the motor
Top