Search results

  1. Scott Danforth

    Going from 25 hp to 35 hp

    I would look at your boat or the motor I can plane my 14' fishing barge with 2 people and 12hp gale.
  2. Scott Danforth

    Aq271 Tacho issues

    line 2 in post #2 called that out
  3. Scott Danforth

    Aq271 Tacho issues

    No, however is the tach set to 8 cylinders?
  4. Scott Danforth

    Prop size?

    because of this statement, I would leave the prop where it is
  5. Scott Danforth

    daily music fix

  6. Scott Danforth

    Transom ski hook to ski rope

    yep. Note, that hook is only rated to pull a skier ( 400# rating), not a tube (2400# rating)
  7. Scott Danforth

    Wiped cam lobe mechanical fuel pump

    Relay coil is not voltage direction sensitive.
  8. Scott Danforth

    Wiped cam lobe mechanical fuel pump

    No, that is the crank signal yo the S terminal. You want to wire to the R terminal
  9. Scott Danforth

    Cobra outdrive

    Pull the drive. That should be done annually
  10. Scott Danforth

    Wiped cam lobe mechanical fuel pump

    The terminals on both the relay and the switch should be labeled Oil pressure gauges go to a gauge sender Pics don't currently work
  11. Scott Danforth

    Stuck In Gear

    Shift interrupt switch not working. Most likely need a new lower shift cable
  12. Scott Danforth

    Wiped cam lobe mechanical fuel pump

    Yes
  13. Scott Danforth

    OMC I/O first test drive, need some part names.

    Did you do all the drive service? Raw water impeller? Ball gears?
  14. Scott Danforth

    Mercruiser 3.7l voltage regulator smoking

    Agreed... Most likely the overheating baked the regulator The 470 can not have even a 10 degree overheat If you maxed the temp gauge, most likely you will find other things baked
  15. Scott Danforth

    Mirrocraft 12’

    Doubt you will get an answer. The company name was sold about 4 times since 1966
  16. Scott Danforth

    Can you paint an outboard cowling with automotive spray paint?

    The purple harbor freight gun is good for about 2-3 cleanings in clear, about another 2-3 cleanings on color, and about 5-10 cleanings on primer If you use them for varnish, they will last about 12-15 cleanings Don't soak them in acetone, the plastic knobs melt
  17. Scott Danforth

    1995 OMC Cobra v-6 will not rev out under load

    Look at the fuel system Look to make sure ethe flappers are not plugging the exhaust Motor will rev running on only 2 cylinders
  18. Scott Danforth

    Mirrocraft 12’

    The factory tag would look similar to this https://garzonstudio.com/media/catalog/product/cache/59459228875d6cf9fada9a2c32eb4717/w/-/w-mirro-craft-14-boat-capacity-decal-1960s-plate-sticker.png
  19. Scott Danforth

    Mirrocraft 12’

    It could be a state assigned HIN from a registration in the past 50 years. However a 1966 mirro craft would have a serial number tag from the factory HINs were not made until 1972
  20. Scott Danforth

    Mirrocraft 12’

    Boat earlier than 1972 have serial numbers which would be on the tag They do not have HINs on the hull
Top