Search results

  1. Scott06

    Merc Alpha 1 trim solenoids strange behavior.

    Your up button has two detents in it push lightly and you have trim until limit switch kicks in. Push it farther in and u have trailer to go all the way up
  2. Scott06

    hei ignition retrofit

    Looks like a no name amazon brand
  3. Scott06

    hei ignition retrofit

    You need a shift interrupt with alpha drive as well.
  4. Scott06

    Bellows Kit for an Alpha One Gen Two?

    https://nuwavemarine.com/mercruiser-i-o-inboard/mercruiser-transom-assembly/mercruiser-alpha-gen-2-transom-assembly-parts/alpha-gen-2-bellows-repair/oem-mercruiser-alpha-1-gen-2-transom-bellows-repair-reseal-kit-30-803099t1/ you also need a tube of bellows adhesive, also not a bad time to do...
  5. Scott06

    Stupid Question from New Member

    110 hp is the 2.5 Chevy based. Neighbors had one in their StarCraft
  6. Scott06

    Stupid Question from New Member

    This - had to chisel mine off. Your engine is the 153 ci/2.5 l which is the smaller brother to the current 3.0. The engine family is related to the 194/230/250 ci straight 6, and was first insatlled in the 62 chevy II. Your drive set up is likely the early EZ shift vs the newer MC-1 drive. Merc...
  7. Scott06

    Removing trim senders screws

    had to drill and tap mine out #10-32 i belive
  8. Scott06

    '98 Stingray 190LX 4.3 Merc Stuck in Muck Issue

    Take off the elbow and see if passages are clear
  9. Scott06

    '98 Stingray 190LX 4.3 Merc Stuck in Muck Issue

    What is super hot in terms of temp two thoughts not unusual for manifolds to be different temps due to not being level. Also since this thread started with sucking up silt could be clogged
  10. Scott06

    Engine making new sound? Can I still use it?

    Its compression related either exhaust manifold gasket leaking or head gasket leaking did u do a compression test
  11. Scott06

    Sank the 'ol girl!?!

    Yeah I would pull the distributor cap and look for corrosion. Yes ignition module and sensor in distributor would likely get smoked if they went swimming The TBV ignition is fantastic until you need the module which is crazy money . I bought a spare on eBay years ago for $200 but don’t see...
  12. Scott06

    4.3 runs great for about 30 minutes then bogs, pops won't accelerate

    Try opening the fuel tank fill cap to see if the fuel tank is under vaccum due to a plugged vent. Did this start immediately when swapping the carb or were you having carb issues before swapping the carb? reving in neutral is relatively meaning less as the engine is not under load. Do you...
  13. Scott06

    4.3 mercruiser alpha 1

    Before you jank engine I would try pulling the drive to ensure that the drive, gimbal or u joints aren't locked up. Then use a strap wrench on balancer so you don't risk breaking the balancer bolt off in the crank.
  14. Scott06

    How to install a temp gauge on an engine outside of boat?

    I used a $20 bosch mechanical gauge from the auto parts store. there were a few 1/2” pipe plugs on the water crossover thermostat housing that I stabbed it into
  15. Scott06

    4.3 mercruiser alpha 1

    Would be surprised if that wasnt offered with a V8 originally If you want togo that route. where to get it depends on how much u want to spend . i got mine from Michigan motorz. I bought a partial engine. Which is A new long block, intake , carb, and ignition . they also offer reman engines if...
  16. Scott06

    Assembling exhaust manifolds, risers and elbows - Loctite 510?

    bondo is saying put the gaskets on dry , use the perfect seal on the bolt threads. Perfect seal seems to be a magic potion keeping the threads from corroding so you can get them apart next time ….
  17. Scott06

    Sank the 'ol girl!?!

    Are you getting clean gas to the carb and a strong spark? Was fuel filter changed ? Might be water in the line. Dribble gas down carb someone cranks it should be able to keep it running if u have spark wnd fuel contamination is the issue
  18. Scott06

    4.3 mercruiser alpha 1

    As mentioned another 4.3 is simplest. Not sure what boat this is in And if a V8 would fit in enginecompartment I swapped a 4.3 for a V8 in my 21 ft sea ray. It was easy because the boat was offered with a V8 from factory, so engine mount stringers were big enough to accommodate the mounts...
  19. Scott06

    4.3 mercruiser alpha 1

    Its with the four hoses on front of intake manifold just above the water pump
  20. Scott06

    4.3 mercruiser alpha 1

    Its toast would take the engine out and get a new long block
Top