Search results

  1. dingbat

    E10 and old 2-stroke engines?

    Swap out any fuel lines that are 10 years or older. Buna gaskets (black) make it 4-5 years before they start to weep with E10. Wouldn't change gaskets until they start to weep or the carbs need rebuilt
  2. dingbat

    Battery Isolator switch and Perko switch

    https://www.bluesea.com/support/articles/58/Battery_Isolators_and_Automatic_Charging_Relays
  3. dingbat

    E10 and old 2-stroke engines?

    Bought a Stihl 028 to clear a lot in 1989. Same thing happened to the plastic “aquarium tubing” in the tank @ 2015 or so. Replaced with Tygon tubing. Watching, but still no problem with the same line on my shindiawa trimmer of the same vintage
  4. dingbat

    High speed live well pick up.

    First off, what pump do you have? Where is the pump mounted? What are you calling a “high speed pickup? Once primed, a pump will typically stay primed until you remove the boat unless you have a leak in the supply line.
  5. dingbat

    Battery Isolator switch and Perko switch

    It’s either the isolator or the ACR. You can’t have both in the circuit What battery switch? Starter typically goes to “common” where you currently have the power panel connected.
  6. dingbat

    Live well 1984 Aquasport Osprey.

    The drain should be plumbed directly overboard. On a boat that old, the drain hose could have rotten or broken off and your dumping the water in the forward part of the bilge and the limber holes are clogged
  7. dingbat

    Polish / compound / wax questions!

    Why are you using paint conditioner on gel coat? Gel coat is pigmented. The “haze” is UV damaged gel coat. The only way to restore the color is to remove the damaged material surface. Removing the damage surface is done using rubbing compound on lightly damaged gel or sand paper if the...
  8. dingbat

    Chap Quality Control is gone

    It all starts with poor designs coming from Engineering….if the design is solid, a monkey can be taught to do the assembly work.
  9. dingbat

    Polish / compound / wax questions!

    If your color is still dull you didn’t use an aggressive enough rubbing compound. I would recommend something like Smoove Pro-Cut 1000 Normally I use Collinite 920 Fiberglas cleaner followed up with 2 coats of Collinite 885 Fleetwax. https://www.collinite.com/product-category/marine/ If I’m...
  10. dingbat

    Has anyone actually seen ethenol ruin anything?

    Been running nothing but E-10 since 2000. Done nothing except swap out carb gaskets (brown) on the 1997 Ocean Pro in 2005. Ironically, the carb stack currently on the motor (1998) never had the gaskets updated. Just now starting to leak bad enough to need replaced.
  11. dingbat

    Weight distribution hitch didn't fit trailer rails

    Depends on the option package(s) on his truck. If he has the 3.5EB with the heavy tow and payload packages, he has 4 wheel disc plus the “engine braking” feature in tow haul mode. My wife’s horse trailer is pushing #8k pretty hard. She drove around for a week or so without (electric) brakes...
  12. dingbat

    Weight distribution hitch didn't fit trailer rails

    Where did you come up with the need for a weight distribution hitch with that truck? A WDH is only required for bumper pull over #5K. https://tailoredtrucks.com/wp-content/uploads/2022/03/2013-f150-owners-manual.pdf
  13. dingbat

    Hummingbird issue

    Apparently you’re right on the voltage threshold of the unit. In neutral say you’re at 12.0 volts. In gear, your at 11.8 volts Bad connection or poor installation
  14. dingbat

    Yamaha OX 66 , slight water intrusion drive ,

    I wouldn’t even drain it. Simply crack the plug. Water would be the first thing that comes out. No water, you’re good to go.
  15. dingbat

    Transducer placement

    Yes, transducer… ;) No reason you can’t try it on the left side. Just need to put it further outboard. Can’t get too far out or you’ll have issues in turns
  16. dingbat

    Transducer placement

    Basic sounder. You would be Ok anywhere outside the radius of the prop
  17. dingbat

    Transducer placement

    A right side rotating prop pulls water into the prop and pushes it downwards The left side of the prop is pushing water up and outwards….and into the transducer I always keep my prop 2-3” outside the radius of the prop Does the unit have side scan function? If so, you will probably need to...
  18. dingbat

    Outboard Mounting Height

    Every hull reacts different to a bracket. What boat are you working with? Generally speaking If the motor is falling flat it’s too low If you’re blowing out the prop is too high.
  19. dingbat

    chesapeake blue angels

    The app I attached is based of real time buoy data at specific locations. The other sources are useless generalizations for a body of water as dynamic as the Bay. The marine forecast broadcast is pretty good but that too can be flawed based on generalities. Tide changes direction basically...
  20. dingbat

    Mini Excavators

    A friend used his mini excavator to dig the water lines from the house out to the barns. Roughly 24” deep, 14” wide by 250 ft. long. Took 2 full days. Wasn’t impressed with the equipment. I used the front end loader on my tractor to push gravel. Use a drag hallow to smooth it out.
Top