Search results

  1. Scott Danforth

    1975 225 OMC

    With your drive, there is no advantage. The drive can't take enough power to need more cooling water flow
  2. Scott Danforth

    2014 Shorelandr Tail Light Connector Issue

    BTW, those connectors are usually molded on the harness by the harness manufacturer.
  3. Scott Danforth

    Window plastic latch replacement

    https://www.taylormadeproducts.com/hardware/
  4. Scott Danforth

    Outboard motor upgrade?

    Without a center log and lifting strakes don't bother. A pontoon is a displacement hull until you force it on top the water to be a planing hull. Until then the speed is governed by the limits of a displacement hull Here is an 80mph pontoon. Twin 450Rs. That is 900hp To take a pontoon...
  5. Scott Danforth

    projects other than boats

    Found a bunch of what look like plasma cutter holes Either way, the frame is straight and strengthened.
  6. Scott Danforth

    1975 225 OMC

    Without the impeller in the drive, the exhaust going thru the drive will overheat the drive A crank driven pump would not draw through the OMC drive. You would end up with a pickup
  7. Scott Danforth

    Volvo penta 4.3 gxi rough running

    No, he sent the ECM to Bob at OBD2 and it was bad. So he sourced another
  8. Scott Danforth

    Process for changing boat trailers?

    buy a 4' hitch extension with a set of dolly wheels for when you are at the ramp since your truck is a 1-legged wonder. there are ramps dad and I used to go to that we backed in until the water came in the doors in order to launch
  9. Scott Danforth

    Aq 151b shop manual work for aq151a

    marine gear oil is fine. SAE 30 is fine if you have a SP. and yes, there is a specific drive manual. its about 200 pages. https://www.volvopenta.com/en-us/your-engine/manuals-and-handbooks/
  10. Scott Danforth

    Teleflex Fuel Gauge 61245

    Look at Sierra. Teleflex sold off the gauge line in 2008 to VeeThree. VeeThree sells the gauges thru Sierra or to OEMs
  11. Scott Danforth

    projects other than boats

    So did inventory at work this morning. This afternoon started working on the RV Hacks at Lippert burned through the frame in a few places, then buggered more weld over it Looks like Forest River did the same. 5 holes in a cluster, and a booger of weld in the middle. Stuck bits of weld wire...
  12. Scott Danforth

    Starter crapped out today, I tapped it with a hammer then it worked.

    for SBC's there are 4 different starters direct drive vs PMGR staggered pattern (168 tooth flywheel) vs straight pattern (153 tooth flywheel) your 1985 originally came with a heavy direct drive starter go with PMGR.
  13. Scott Danforth

    12' Aluminum V-Hull - Issues porpoising and planing

    any hull mounted tab that extends the running surface works well. they used to sell aluminum pods that did the same thing.
  14. Scott Danforth

    Cabin air intake 2015 Silverado??

    takes about 3 minutes to pull the inner fender liner. not sure how long it takes to pull the fender. however If I recall, you could screw a bit of hardware cloth over the opening.
  15. Scott Danforth

    How to mount a trolling motor to Bayliner hull

    pretty sure you have to make the adapter plate
  16. Scott Danforth

    Cabin air intake 2015 Silverado??

    I am pretty sure its in the upper portion of the cab cowl area behind the right inner fender well.
  17. Scott Danforth

    Cabin air intake 2015 Silverado??

    there is also a cabin air filter. air intake is just above that, and I believe runs to the fender. I think I recall seeing it when I pulled the fender liner on the GMC to get to the starter.
  18. Scott Danforth

    1975 225 OMC

    without running the coolant thru the drive, you will overheat it. not a good idea even on mercruiser alpha when you switch to the crank driven pump, you must keep the pump in the leg to keep water circulating
  19. Scott Danforth

    88 Stratos Bass Boat needs new reclear

    marine imron is Axalta
  20. Scott Danforth

    1992 Four Winns 5.8 No Start

    No power in the run position is usually a bad key switch New does not equal good
Top