Search results

  1. Scott06

    Ford 302 spark plug read

    Yes it would but trick reading plugs is trying to figure out when its is in cruise (step up rod down) vs power (step up rod up/out) and immediately reading the plugs after a few minutes in each phase.
  2. Scott06

    Ford 302 spark plug read

    the one on the left has more potential combos other one is just the combos available with the kit. The kit covers all of the shaded area which is most of the combos.
  3. Scott06

    Ford 302 spark plug read

    What difference are you seeing? the book will have more combos then the kit. I believe the kit is just a portion of what rod and jet combos are available. I ended up buying individual rods as I went.
  4. Scott06

    Building a '93 Caravelle 1750 Classic Bowrider

    You may need to run it as is or JB it and wait for later to get the tooling ... How much comes out of block when running? really frustrating as out of all the engines to winterize the 3.0 is apiece of cake two plugs easy to get at.
  5. Scott06

    Rebuilt 5.7 Penta

    Wonder if it is this one that looks like a Delco EST marine rated plug and play knock off? https://www.holley.com/products/ignition/distributors/marine_distributors/parts/83663 or this one not sure the difference...
  6. Scott06

    Intermittent Alarm Beep - Mercruiser 5.0 V8 MPI

    If it makes you feel any better I went through the same issue a few years back. Bought a handyman's special with a cracked block, repowered it, first time in the water so of course I'm on edge about any noises etc.. Drop the boat in ... running perfectly no leaks... go past a navigational buoy...
  7. Scott06

    5.7 MPI Misfires Under Load

    Why dont you let people know what you are working on and what issue you are trying to solve If you have an MPI engine and you are chasing a possible misfire have you changed the distributor cap which is a know failure point on them.
  8. Scott06

    Ford 302 spark plug read

    I used the top hole which is the biggest shot. I also replaced the accelerator pump nozzle with a larger one (.043 i think). The issue I had was there was slop in the accelerator pump linkage. Had to slightly lengthen the rod by straightening it out. This way the accelerator pump is under slight...
  9. Scott06

    Looking for reviews on 2009 Bayliner 175

    Bayliner quality has improved since they had all of the issues. It is still and entry level boat. I had a similar size Sea Ray with a 3.0 years ago. As my kids got bigger that boat got small fast. How many people do you plan to go out with? Would be looking for repair and winterization...
  10. Scott06

    U Joints

    The moogs worked fine for me. Had the boat 3-4 years after I put them in before I sold it. As far as the prop a Mercury Black Max or Michigan Match would be similar to what you have there
  11. Scott06

    U Joints

    I don't think the trailer position caused this issue. For years my family has had a lake house in a large shallow cove so every time we take the boat out there is about 8-10 min of outdrive almost all the way up and idling in and out of the cove. keep the rpms below 1000 and it is fine. doing...
  12. Scott06

    Ford 302 spark plug read

    I found it helpful as I had a lean spot after hitting the throttle due to slop in accelerator pump circuit then I was too fat on the step up rods. I assume you have log not center riser exhaust manifolds? Not sure if these 02 adapters will fit your manifold and elbow configuration...
  13. Scott06

    U Joints

    moog 315G or equivalent works for a gen one..
  14. Scott06

    Ford 302 spark plug read

    http://wallaceracing.com/plug-reading-lm.html Look at the link your plugs show a tad rich on their scale. I had similar plugs on Mine thought they were lean bc insulator was clean, put an afr meter on and was way rich … Plug reading is only good if you run it cut it off and read the plug...
  15. Scott06

    help help help overheating Mecrusier

    not by a boat... Also thats not $2 k worth of parts. Unfortunately if you dont spin your own wrenches you need a checkbook
  16. Scott06

    help help help overheating Mecrusier

    on a gen two unless housing is scored there is no need. The stainless housing is much more robust than the earlier plastic ones. Merc has a kit with impeller baseplate and gaskets for about $55. Unless it was run dry forever thats all you need. Many places to buy but this is the oem kit merc...
  17. Scott06

    help help help overheating Mecrusier

    this is part one of two. This guy is s legit mechanic who used to be a moderator on this forum should have link to part 2 when u watch this
  18. Scott06

    help help help overheating Mecrusier

    Since there is no water coming up from drive would back flush down that hose to see if u get water flow in reverse direction. If you dont there is a clogg somewhere. get the merc manual for your drive will see if i can do s9me screen shots of impeller work.
  19. Scott06

    4.3 mercrusier wires go to??

    Do you still have a TKS carb or do you have a mercarb with a choke? Possible someone swapped out a TKS for a electric choke carb. I think the execution of the tks carb was not one of Mercs shining moments... wouldn't surprise me if someone disconnected it.
  20. Scott06

    Revolution 14.6x19P vs 3-B something?

    The rev 4 s are crazy expensive now. different application but i run one on my 21 ft sea ray And really love it. Biggest advantage in my application was being able to use full trim with out blowing out. Gave me slightly higher top end and lower slip than an enertia ( standard enertia not eco)...
Top