Search results

  1. S

    1982 Johnson 50Hp won’t start

    Did you save the old stator because maybe nothing is wrong with it?
  2. S

    1986 30hp Johnson newly obtained, not starting

    Another thing that a newbie might do is plug the tank fuel line in the wrong way assuming you have quick disconnects on both sides of the fuel line. On the fuel squeeze ball there is an arrow showing which way the fuel goes . Make sure that it is pointing towards the end that is connected to...
  3. S

    Help please! 1988 Johnson outboard lack of power and stalls.

    Fuel problem. I would replace the fuel pump with an OEM one or better yet rebuild the vro.
  4. S

    Help please! 1988 Johnson outboard lack of power and stalls.

    Before you by passed the vro I assume. Have you tried pumping the fuel line ball to see if it runs better? If so that would point to the Amazon fuel pump you bought.
  5. S

    1986 30hp Johnson newly obtained, not starting

    You might have flooded it. Did you have the throttle in the start position? I believe once you figure it out it will be a piece of cake. Here is the procedure again, just more detailed.
  6. S

    1986 30hp Johnson newly obtained, not starting

    Okay, I'm pretty sure it'll run okay you just don't know how to start it. So next to the start button is a knob and you think it's a choke but it is not. It's a fuel primer. So follow these steps, and let's see if it'll run. First of all I'm assuming you've got it hooked up to water or you've...
  7. S

    Help please! 1988 Johnson outboard lack of power and stalls.

  8. S

    1986 30hp Johnson newly obtained, not starting

    Okay, my goof. My 1987 30 horse Johnson has the clip and that must have been the first year. I know what you're talking about about how the switch doesn't feel like it's going in but it is. Just a little bit. So what's your knowledge of this motor? Like racer says, you have a primer and not a...
  9. S

    1986 30hp Johnson newly obtained, not starting

    Should be something like these.
  10. S

    1986 30hp Johnson newly obtained, not starting

    Yes, the kill switch serves two purposes. One, if you push it in it turns off the motor but it also has a little clip in it with a little string that you clip to your body. If it pulls out of there it also kills the motor. If you lost that clip when you transported it it will not start. Do you...
  11. S

    1986 30hp Johnson newly obtained, not starting

    People on here will want a model number. Is it a tiller motor? Could be as simple as the clip on the man overboard switch.
  12. S

    Help please! 1988 Johnson outboard lack of power and stalls.

    Amazon fuel pump is crap, you didn't tell anyone the HP or better yet the model number. Could be many things so maybe slow down, and systematically rule out things.
  13. S

    2004 Johnson 90 blowing main engine fuse

    Doesn't your tach have all the warning lights?
  14. S

    93 Johson 150hp fuel issue

    How does one know what a full bowl looks like? When you remove the bowl everything that's in there is no longer displacing the fuel making it appear low. Put the carb back on without the carb bowl and while pumping the fuel ball see if the float switch is regulating the fuel. (Manually adjust it...
  15. S

    1960 Evinrude Fastwin Stutter

    Yes, the crank will need to be cleaned up because most likely it got scraped up with the old key...in fact to many times and it's unfixable. There is plenty of places online stuff about how to use compounds to clean it up. Sorry your running into so many problems.
  16. S

    1996 Johnson V4 130HP Intermittent Power Loss

    If it's peeing strong, than that just means the pump is working.... doesn't mean it's cooling. Could be bad thermostats or all the passage ways could be plugged. Having a alarm not hooked up would have only exasperate that problem. Overheat might set off a safe or limp mode. Run the engine and...
  17. S

    1996 Johnson V4 130HP Intermittent Power Loss

    Have you checked to see if the motor is overheating? Have you checked for spark after it has symptoms? Have you checked compression? Motor will always seem fine with no load....( Neutral )
  18. S

    1993 Evinrude 200 TXT Peeing but no water at thermostats

    Pull the heads which would show all of the head passages and access to the areas around the cylinders. Hopefully someone can give you more opinions on the limp mode tests first.
  19. S

    2005 J90PLSOA only firing on right 2 cylinders

    Better experts on here on the whole limp mode stuff. Port side has what I believe the brown wire and the white wire. Forget which wire causes that. By the way, that's the sensor that is really hard to get and expensive. I did kind of get ahead of myself, is water pump TT flowing? Did you get any...
  20. S

    1993 Evinrude 200 TXT Peeing but no water at thermostats

    I wouldn't allow much pressure to build because you could blow a gasket somewhere. The more I 🤔 nk about it probably best to just remove things and go through all the water passages.
Top