Search results

  1. Scott06

    Carb Issues At Small Elevation Change?

    Sounds like some of the passages in the carb are plugged probably the transition circuit, if you mash the throttle and that helps seems like accelerator pump is working. As Bondo said fuel filter is a good annual maintenance item - check what comes out of it. With mositure and sitting typical...
  2. Scott06

    Merc cruiser 5 0 backfire

    I suspect its probably a lean sneeze. if you haven't done much to it would start with a compression test to verify good mechanical conditin. certainly verify timing and empty contents if fuel filter into container and see if there is anything other than clean gas. What do the spark plugs look...
  3. Scott06

    Main engine for trolling

    So he confirmed just for break in then? Now run it like you stole it…
  4. Scott06

    Carb Issues At Small Elevation Change?

    Normally that shouldn’t make a difference With such a minimal altitude diff. Would suspect you have a fuel delivery to carb or carb rebuild issue. if you slowly advance the throttle does the problem occur or only if yiu stab the gas. what is the maintenace history of boat? Would start with fuel...
  5. Scott06

    FIP 3/4x3/4 Brass Butterfly valve

    slow crowd caught up…missed hydrohoist in post 1 … mmc is my goto at work, not always the cheapest but incredible how fast they process orders and never have any quality issues with their items.
  6. Scott06

    FIP 3/4x3/4 Brass Butterfly valve

    Still loosing me there but doesnt really matter …
  7. Scott06

    FIP 3/4x3/4 Brass Butterfly valve

    https://www.mcmaster.com/9798K34/ not sure what HH valve is so hopefully this isnt it.
  8. Scott06

    Correct prop

    First verify your tach is correct. You want to be in the 4600-4800 rpm range at wot. What are the specs on these props as if RPMs are accurate neither of them are appropriate for the application. is this a new to you boat what is the overall maintenance situation with the boat. If it is down...
  9. Scott06

    Hydraulic Lifter Volvo Penta 4.3 Vortec

    If there are no vacuum leaks on the intake leave it. Not ideal but I've reused them before in a pinch (when doing things twice...) if they are in good shape...
  10. Scott06

    Removal of broken head bolt

    Is part of it sticking out once you remove the head? On things like this and exhaust manifold bolts if you can get at a stub of it and apply some penetrating oil and heat you may be able to get it out. If there is enough of a stub I put a pipe wrench on the bolt after heating it. If broken...
  11. Scott06

    What is this battery for?

    Would assume front battery is for a trolling motor
  12. Scott06

    Upgrading, or downgrading?

    Agreed- I think the 4.3 MPI /220 hp would do fine in a 19 ft boat, I just don't think it makes sense to go up only a foot and the kids will keep growing. I went from a 17-18 ft Bow rider to a 21 , that was a nice upgrade. Also to OP your use sounds similar to mine- I wouldn't trade my full...
  13. Scott06

    Searay 2016 Mercruiser Alpha One Gen 2

    This is the kit u need https://nuwavemarine.com/mercruiser-outdrives-parts/o-b-i-o-cooling-water-pumps/oem-mercruiser-alpha-gen-2-impeller-repair-kit-47-8m0100526/?gclid=EAIaIQobChMI9o7Pmbmf-gIVCq_ICh0bBgWqEAQYAiABEgJ4P_D_BwE
  14. Scott06

    Alpha gen 2 housing to gen 1 outdrive

    no without swaping gen one transom no…
  15. Scott06

    Small piece of plastic drain plug went into exhaust manifold

    Just keep an eye out that that manifold doesnt run how next year. …
  16. Scott06

    Merc 4.3

    Yes has been my experience as well 4.3 vortec in a up to about 20 ft works well.of course more power is nice and every boat line has low buck 3.0 or 4.3 carb 5.0 in a bigger boat price point offers. 4.3 has proved to be inexpensive durable and powerfull. way more power per engine size and wt...
  17. Scott06

    Main engine for trolling

    exactly i suspect his builder was speaking of break in vs long term use
  18. Scott06

    Main engine for trolling

    No its not ok dont waste peoples time with your useless comments consensus here is no real issue use it. Yiu may ned up with plug fouling , but that is if you only idle
  19. Scott06

    Merc overheating…

    lots of people dont own or want a trailer. Marina puts it in the water in the spring, takes it out in the fall, winterized, and stores it. if you are diy type then u need one.
  20. Scott06

    " Prosessing " a donor boat. Best way?

    Most of the value is in the running gear and helm controls. If you can use the seats sure why not typical back to back seats - I imagine you may need to make new bases for them but this is simple carpentry, helm seats are even easier. Parting out cars I kept too many items that had no to...
Top