Search results

  1. Scott Danforth

    2013 Mercruiser 3.0 MPI (engine rebuild)

    they all use the same 10 pin connector. the wiring is the easiest part of the swap.
  2. Scott Danforth

    1999 Chaparral Sunesta 232 VP sx duoprop

    are you talking the 6 transom bolts that bolt the shield to the transom, or the 6 bolts that bolt the drive to the bellhousing? transom bolts us 5200 on the inside to seal the 6 holes. no seals or sealant on the 6 bellhousing bolts.
  3. Scott Danforth

    Exhaust Bellow

    on the other hand, if the rubber was rotten, your other two bellows are probably needing changing as well.
  4. Scott Danforth

    Tapping noise when turning

    I personally would recommend that you do the work yourself
  5. Scott Danforth

    Tapping noise when turning

    Anything is possible.
  6. Scott Danforth

    v378 horn compressor location

    Are you sure it's an air horn?
  7. Scott Danforth

    Tapping noise when turning

    Pull drive, inspect alignment and u-joints
  8. Scott Danforth

    Glastron tandem axle boat trailer question

    Contact glastron with your trailer VIN for a parts breakdown or do research on sites listed above
  9. Scott Danforth

    Alternator

    Looks like a bad knockoff from China.
  10. Scott Danforth

    Fogging thru carburetor

    Nah.....just grumpy
  11. Scott Danforth

    Which hull brands to avoid

    Buy one between 5-10 years if you want a quality interior. Or have the interior redone Vinyls after 2004 no longer have arsenic as the anti-fungal and they tend to suffer pinking. Regarding hulls, Bayliner and SeaRay after 2002 and under 25 foot come from the exact same building Avoid...
  12. Scott Danforth

    . . . and I Thought Hi-tech Boat Engines Were Bad . . .

    OK, who thinks that step 1 of a starter R&R should be removed the fender liner and work blindly?
  13. Scott Danforth

    Need ideas on problem with 5.7L Mercruiser shutting down

    Shutting down is one issue Not charging is a separate issue
  14. Scott Danforth

    Need ideas on problem with 5.7L Mercruiser shutting down

    Not charging is a completely different issue.
  15. Scott Danforth

    Pistons on Ford 302 / Mercruiser 188

    most likely a reman or a prior OMC motor from the pics, the boat is trashed. the moss growing on the deck means the deck was done as a deckover at least once and that has failed.
  16. Scott Danforth

    Need ideas on problem with 5.7L Mercruiser shutting down

    the 2-wire were problematic, which is why the 3-wire design came out back in about 2003
  17. Scott Danforth

    Need ideas on problem with 5.7L Mercruiser shutting down

    It is in the distributor
  18. Scott Danforth

    buying a full mooring cover from online seller: Q's

    I would contact the local canvas/upholstery shop and have them quote it.
  19. Scott Danforth

    . . . and I Thought Hi-tech Boat Engines Were Bad . . .

    my VW Jetta with the VR6 had the original clutch when I sold it with 240K of well-beaten auto-crossed miles. the daily is the second dual mass flywheel car I have owned. and I will be looking for an aftermarket flywheel and multi-disc clutch.
  20. Scott Danforth

    . . . and I Thought Hi-tech Boat Engines Were Bad . . .

    Not a fan of dual mass flywheels. in theory, it makes sense. in practice, they rattle, cant be refinished and fail often. Im 42k on a new dual mass flywheel & clutch on the whip and its already slipping.
Top