Search results

  1. alldodge

    Another Plumbing Question

    The pic shows what I found. This is a Rheem water heater, one of their forever tank models (bladder type). I installed about 2 years ago and at first there was a slight leak. Tightened it up and all good until now. It looks wet but it's not. On top is a dielectric union and bottom is brass...
  2. alldodge

    What is this hose coming off of fuel pump

    I'm unable to tell if that is the wrong kind of hose but it goes to the flame arrestor. If (note the if) the pump diaphragm inside the pump starts leaking, there will be fuel in the hose going to the arrestor. This keeps the fuel from going into the bilge Should be tygon tubing
  3. alldodge

    Maybe my turn for new boat time

    What might be happening is one motor feeds isolator and charges it's Bat along with House. Only thought if this is I thought is can this have an issue with the PCM have a possible voltage drop of 0.7V :unsure:
  4. alldodge

    Maybe my turn for new boat time

    No understand Has a 3 bank charger and 3 bats. Which is charging both?
  5. alldodge

    Maybe my turn for new boat time

    The deck is dirty because I'm not taking off my shoes yet. To many in/out's arranging things, but it is gelcoat. The boat has just 2 Bat switches (Engines and House) and when their turned on it takes a few seconds of their red led flashing before they go solid. Then things can be used...
  6. alldodge

    Nav light bulb replacement

    Don't know and been unable to find one like it, but have seen them many times. I would guess the white top piece is snapped on. See if something thin can be slide between green and white on top In most cases its a bad connection and not the bulb. Most folks don't run at night enough to burn...
  7. alldodge

    6.2 fuel injection problem

    What's your serial number?
  8. alldodge

    Maybe my turn for new boat time

    First thing we did is remove the Dealer info off the trailer and boat (n)
  9. alldodge

    Maybe my turn for new boat time

    Yes, but its either white or black, and we want blue The guy doing the canvas has done other things for us and he does great work
  10. alldodge

    Intake manifold verification

    Then should be no problem. What ya run into is just finding something for a 302, but with closed cool it can be treated like a car
  11. alldodge

    Intake manifold verification

    You need a marine intake but could get by if in fresh water (for many years) or if closed cool. If in salt there is no way
  12. alldodge

    Maybe my turn for new boat time

    Pick her up and she's now in the barn, probably post some pics tomorrow Hope its not an omen, just left the dealer and first stop I feel a heavy clunk as the trailer hits the stops (surge disk brakes). Not good, call dealer and advise I'm head back. Tech looks under trailer and finds 2 on the...
  13. alldodge

    Ground fault with black wire melting

    With a boat next to nothing is every easy
  14. alldodge

    Mercury 4000 side mount remotes unit issues

    Doubtful but can always ask
  15. alldodge

    Ground fault with black wire melting

    Agree there is a short Might get some strong nylon string/cord and tie to end of wires, then pull wires out other end. The cord will allow new wires to be pulled back thru
  16. alldodge

    Question about installing new clutch/gear set in 1999 Bravo 3

    No expert but my understanding is the TW is applying its torque the the square drive area. It measures at the square drive and is calibrated for the wrench flex. The longer the wrench the more flex, shorter less flex
  17. alldodge

    Banking Software

    I do the same
  18. alldodge

    Engine alignment ,just got the tool. Pics posted

    What I'm understanding now is your probably good to go Mine only cost about $20 so no issue with the cost, only if it was made correctly. Having uniform marks is a good sign
  19. alldodge

    Engine alignment ,just got the tool. Pics posted

    It's I doubt the vibration is caused by misalignment Getting no marks means the coupler is shot (Doubtful because boat was moving), or your not getting it actually into the coupler Take something long and skinny (stick, dowl rod, other), put it the bottom of the coupler and mark the end of it...
  20. alldodge

    Deck Repair - Fiberglassing Question (Newbie)

    What your discussing could work but need to cut out the spot first to find out what made it soft. Once it's cut out you may find the issue goes out further then what your seeing now. Most places show up after other things start happening below
Top