Search results

  1. alldodge

    Ns90a idiot mistake

    Don't know what shorted out, but most likely it was the ignition system. If it was a Mercruiser it normally is the ECM
  2. alldodge

    too much outboard for the boat?

    I would start with what is max HP for the boat then find out how much that 2 stroke weighted.
  3. alldodge

    Engine alignment ,just got the tool. Pics posted

    The mounts should be done equally only if they are equal to begin with. If one was turned more then the other then the twist starts. If unsure, with boat seating level and both top nuts loose. Lift motor up slightly by the thermostat housing bolts so the mounts are not touching the bottom...
  4. alldodge

    Building A Mercruiser 350 Few Questions.

    Thinking the last digit is 7 14096217...55-86...350..........Crate motor, 285hp/300hp, 64cc chambers, 72' or 90' center intake manifold bolt angles
  5. alldodge

    Engine alignment ,just got the tool. Pics posted

    In most cases yes the motor is in a slight twist Do look real close and the splines on the coupler. They need to be square no taper of the corners
  6. alldodge

    Banking Software

    Ebay still sell version 2011 on CD Found it went to rental 2018
  7. alldodge

    Banking Software

    Bummer
  8. alldodge

    Banking Software

    I to like spreadsheets and use it for tracking taxes and my vacation rental. Use Quicken for the five bank accounts
  9. alldodge

    Ilmor/Yanmar Drive Trim Pump Relay issue

    If its not the relay it has to be a bad connection somewhere.
  10. alldodge

    Thoughts/comments on these 3 possibilities

    I have a 73 Chrysler, rebuilt the hull, have 4 motors and still have not got it water ready. I'm almost ready to give it away but just can't do it as yet
  11. alldodge

    Banking Software

    Using Quicken Premier 2011 and has worked well thru all the MS upgrades. The issue concerning me is for how much longer. Seems now everyone doesn't want to sell SW they only want to rent it. Several others out there but any have other recommendations?
  12. alldodge

    Engine alignment ,just got the tool. Pics posted

    What ever you do, do NOT hammer the bar in. Hammering is only for side to side. I use my hands and just smack it all around. If its hammered IN it can get stuck
  13. alldodge

    Hole in Mercruiser gimbel housing

    Being aluminum means it won't rot after drilling the hole, so no worries there.
  14. alldodge

    Maybe my turn for new boat time

    Have not thought of mesh, and this would only be used in cool weather so we could run around a bit longer (not having to winterize anymore :p)
  15. alldodge

    Thoughts/comments on these 3 possibilities

    Crownline 180 - There are no inline 6, it should be a 3.0 4 cyl Agree with Ted, it will be the hull that should make the decision after you know the motor runs
  16. alldodge

    Maybe my turn for new boat time

    Soon as I get it and might, but have a few things that I need to get done. The boat lift guy is going to rearrange the bunks and would like that done before taking it to the canvas guy. Last time I wanted the guy to redo the lift it took 3 years and I wound up doing it my self :rolleyes:
  17. alldodge

    Maybe my turn for new boat time

    Talked to Gary, and he said he would do it but having a local guy and he is really busy it would be best to go with my guy if that is an option
  18. alldodge

    Hole in Mercruiser gimbel housing

    Need pics
  19. alldodge

    Purpose of material under fuel tank in aluminum boat?

    Watch it, master tech is watching yes I was being bad aging
  20. alldodge

    Purpose of material under fuel tank in aluminum boat?

    Let it go its not worth it
Top