Search results

  1. alldodge

    Liquid in VST float?

    No, never Doesn't matter if its in a carb or VST
  2. alldodge

    DTC 113: IAT voltage high ( please help )

    The DTC 113 is set anytime the IAT voltage is above 4.95V and will display on the scanner 110*F The IAT is a 2 wire sensor and screws into the rear of the intake behind the Throttle Body (TB). Find sensor, turn key ON without starting and measure the voltage across pins (A and B). A is power...
  3. alldodge

    Steering bracket help 1959 lark 35

    You asked a question about something that needs to be seen. What if I asked you Have you seen my boat it sure is pretty, what do you think?
  4. alldodge

    Need Help With Finding Insurance

    There out there, but be ready to pay to have your boat surveyed. Also remember, many agreed to values does not cover everything that may happen to it. Read the fine print ad understand it Also be ready for the price tag of an agreed to value. Many insurance companies have been taking a bath...
  5. alldodge

    No start situation

    No, 1.25 to 2.25 is within range from my view. Check the float height, most likely its to high
  6. alldodge

    Hard starting

    Factory shows 72 / 84 or 73 / 73 with 6.5 power valve for 750 cfm Looks like they have been changed, most likely for similar issues. The factory setup is to get it within range. Changing jets by +/- 4 usually means there is something else going on. Yours being black might be the power valve...
  7. alldodge

    No start situation

    Thats flooding
  8. alldodge

    Hard starting

    Going to look up the sizes but your plugs are saying there is to much fuel
  9. alldodge

    5.7 GSIPEFS Timing??

    Was this 2 different things? Marked Dizzy and pulled Then rotated motor to TDC
  10. alldodge

    Hard starting

    Your getting to much fuel, and the second pumper is just adding more. The 4150/4160 come in a variety of configurations (single, double, E choke, etc) and good thing is they are easily changed. Do you know what jets are installed?
  11. alldodge

    4.3 will not run

    woops your right, tx
  12. alldodge

    OMC Cobra EFI 5.0L stopped and won’t start again

    Don't have a 5.0 only 5.8 manual. Not seeing what you have yet, but still looking. The coil has 2 small connections. Put meter + probe on the + side of the coil and the - side probe to ground. With key turned ON see if you get power. If you do, leave probes on and crank motor to see if...
  13. alldodge

    Prop diameter effect and planing trouble

    Yes and No If (note the if) the motor has enough low end torque for the size, weight of the boat then yes. No if there is not enough HP. Your not able to quickly get up on plane so you don't want to loose any more hp turning the prop then necessary. The other side is also once on plane if...
  14. alldodge

    OMC Cobra EFI 5.0L stopped and won’t start again

    ok, then I'll forget about it being a fuel problem Do you have 12V at the coil? Have spark?
  15. alldodge

    OMC Cobra EFI 5.0L stopped and won’t start again

    Might be where your buying gas. Wouldn't be the first time it was coming from the station. Some have blown up brand new motors (1000HP blower type) by filling up at the wrong station Many, many discussions on the tank level for winter, gas going bad, water, yet none have proof this happens...
  16. alldodge

    4.3 will not run

    Your getting to much fuel, and the second pumper is just adding more. The 4150/4160 come in a variety of configurations (single, double, E choke, etc) and good thing is they are easily changed. Do you know what jets are installed?
  17. alldodge

    4.3 will not run

    Being a 2007 it might MPI but could be TBI, but need motor serial number? MPI/TBI - running for a few seconds, I'm thinking fuel pump Carb - ignition
  18. alldodge

    OMC Cobra EFI 5.0L stopped and won’t start again

    Your not going to get enough water just sitting thru the winter to make an issue. You have something that is leaking water into the tank. If the boat is on a trailer How and where is it stored? Pic maybe What boat is it? Where is the gas fill and tank vent?
  19. alldodge

    Instrument panel lights stay on

    Bats OFF and lights stay ON, then there is another wire that goes past the Battery switch
  20. alldodge

    Hard starting

    A double pumper is not a boat carb, but that's a different issue then yours now Being a 1990 you probably have a TB4 ignition, a serial number would verify. What does this mean? Crank for a few seconds, off and repeat, or just keep cranking? What is your procedure to start? Pump once, crank...
View older results
Top