Search results

  1. Scott Danforth

    Risers - think I caught this just in time?

    4.3's are always on the edge of reversion
  2. Scott Danforth

    Sport Jet 175 x2 with low compression

    first, your compression is low verify your gauge and retest second, 800 RPM is spec for idle third, wanting it to idle at 1500 is just trying to band-aid issues fix your fuel system issue. do a proper link-n-sync you may have to go thru the carbs again paying attention to the chokes and...
  3. Scott Danforth

    Recovering Boat Seats

    at $132 / 16 ounce spool
  4. Scott Danforth

    Higher elevation issues.

    could have had weeds on the prop your prop hub could be flaky
  5. Scott Danforth

    What are the 2 sensor on the thermostat housing?

    since it works on resistance. you could have some corrosion between the connectors that are affecting your gauge reading
  6. Scott Danforth

    4,3Gi different fuel pressure?

    Volvo Penta Model numbers explained 4.3 = engine displacement G = GM base motor (F = Ford Base Motor L = Limited (4 barrel Carburetor) / I = Fuel Injection / S = 2 barrel carburetor / Si = High pressure fuel injection / Xi = MPI (Multi-Port Fuel injection) P = Power Steering M=Manual Steering I...
  7. Scott Danforth

    4,3Gi different fuel pressure?

    because you should be looking up parts by your serial number. not the model number each fuel system is different. the pumps are per the chart posted by AD
  8. Scott Danforth

    1988 Rogue 2420

    Uh....no I turn key, boat starts, gauges move.....we go boating. On a serious note, have to redo the headliner in the cabin because it came down and warped in the heat
  9. Scott Danforth

    Higher elevation issues.

    first, welcome aboard next, you have a few issues going on. for every 1000 foot of elevation, you loose 3-5% power (depending on barometric pressure) normally, as you go up, you must drop pitch. additionally, you are probably getting cavitation if you can turn 4400 RPM, so check your hub you...
  10. Scott Danforth

    1988 Rogue 2420

    Well, the graphic we found that was the basis of the paint scheme on the salt shaker is apparently a 2013 Formula Fastech 292
  11. Scott Danforth

    What are the 2 sensor on the thermostat housing?

    you should not get any voltage on the tan wire. its a variable resistance to ground.
  12. Scott Danforth

    New valve cover gaskets and still leaking V6 4.3

    I think you are chasing blowby coming out the breather
  13. Scott Danforth

    Which boat? Brit in Canada ..

    the 2001 searay is most likely either the 190 or 210. no way to get 8 or 9 people in the boat unless you stack them. Price is way too high for the asking. the hull also has a shallow deadrise, so in chop the ride would suck. really need to see what the owner of the boat is smoking and see if...
  14. Scott Danforth

    20 Member family Vacation

    Visit the website Florida on a tank full. Rent an RV. Do a bunch of stops. Some for kids, some for adults
  15. Scott Danforth

    2002 Mastercraft 5.7 harmonic balancer moving in and out

    About a 20 revolution event
  16. Scott Danforth

    2002 Mastercraft 5.7 harmonic balancer moving in and out

    If the crank breaks at about a 45 degree angle, it will drive the snout... Ish.... But make a racket
  17. Scott Danforth

    20 Member family Vacation

    Carnival cruise or Disney cruise? There is also the great train loop that takes 2 weeks thru the west and pnw
  18. Scott Danforth

    20 Member family Vacation

    There is always the people trap operated by a mouse (on either coast) Swimming with sharks on Florida's Atlantic coast, then a cruise out of Miami Fishing and snorkeling in the keys Door County Wisconsin for a beautiful fall, some winery tours, hiking, etc If you want a Caribbean trip...
  19. Scott Danforth

    new 5.7 vortec parts

    dipstick doesnt know what heads are on the motor. the dipstick must match the oil pan.
  20. Scott Danforth

    What are the 2 sensor on the thermostat housing?

    nah.... the tan wire is standard for the gauge
Top