Search results

  1. R

    '95 120hp compression test results

    deleted
  2. R

    87 johnson 30 throttle help

    There is a wee clip #310729 available that holds the cable onto part #83.-----Look for it in ---accessories.----That clip was available / used on many motors in the 1970's
  3. R

    How critical of an issue!

    Looks like motor was tilted in freezing weather.----Have your local fab shop weld that up now.----Not later.------There is an o-ring at / near the front of the crack.
  4. R

    1986 Force 125 hp popping

    Did you torque the flywheel nut and to what value ?----Your description is classic of a sheared key.----Some will argue , but I would check the key again.
  5. R

    1060 Evinrude fisherman 5.5hp

    I normally just use some old head bolts from a 5-1/2 or 6 HP to pull them on small motors.
  6. R

    Questions about starting a marine repair business

    There is lots of demand for service.----Just hard for a start-up to get in on the action.----Once spoke to a shop owner who said.------Folks line up to pay $20 / gallon for coffee.----Yet they grumble at $80 / hr for skilled service / repair work.----Many shops charge more to cover overhead.
  7. R

    1060 Evinrude fisherman 5.5hp

    Use the 3 bolt holes to pull the flywheel---1/4-20NC thread.
  8. R

    8hp Johnson water out of exhaust

    Checked exhaust for blockage ?
  9. R

    Questions about starting a marine repair business

    Most shops are closing up these days.
  10. R

    8hp Johnson water out of exhaust

    What is the model # of this motor ?-----Was it a long shaft now converted to short shaft.---Yes , no or no idea ?
  11. R

    Sierra Spark Plug Boot Fitment to Champion Plugs

    Any pictures of the old boots and these sierra replacements.------Seems strange that a common part like that is giving you problems !
  12. R

    88 Special Carbs

    Have you confirmed that the high speed orifice plug is clean , yes or no ?----Engaging the electric primer valve puts fuel directly into the intake manifold.----This fuel bypasses the metering circuits and jets.----This strongly suggest there is an issue with carburetion !!----Yet you say...
  13. R

    1984 35 hp cough/sneeze

    I believe the reference was to changing the point where throttle plate opens.
  14. R

    Reed question

    I believe that thin metal strip is called a ----SHIM-----As per a factory manual.
  15. R

    1963 Evinrude 75HP Low Speed Jet Carb Adjustment

    Why do you say parts availability is a problem ?---Where have you looked for parts ?----Smooth surging is usually fuel related.----Perhaps test run with another tank and hose.----Check o-rings in fuel connecters.--Check / install fuel pump repair kit.---High speed jets confirmed clean...
  16. R

    88 Special Carbs

    The high speed jets ( orifice plugs ) are screwed into the FLOAT BOWL.---They are NOT in the main carburetor body.------Not sure how you would clean those with a wire brush.----Also check fuel pump diaphragm.
  17. R

    1991 mercury 90hp misfiring

    About 50 years ago it was a common question.----" The filter bowl never fills when motor is running , yet my motor runs fine ".-----Based on that I say normal.-----Tried opening low speed mixture screws 1/8th turn at a time?----Thermostat in place ?-----Some will argue , but I would pull off the...
  18. R

    97 Johnson 25hp goes into “limp mode”

    A 2 or 3 cylinder -----Model # is.
  19. R

    88 Special Carbs

    Perhaps test run with cowling off.----Perhaps test run with another gas tank and hose.
  20. R

    1987 johnson v4 110 cyl 4 not running

    Throw the reed valves on the shop floor and do a compression test.
Top