Search results

  1. R

    1979 9.9 evinrude control box

    Yes the single lever control box can be used.----You also need to find the correct adapter ( for the lower cowling ) to install the shift cable.
  2. R

    1999 50hp Johnson 2 stroke won’t start

    The difference in compression is an ominous indicator of an issue in the cylinder.
  3. R

    Cut through fiberglass hull

    Lots of room on the inside for hefty ( 3 layers ) structural repair.----Go 6" above and 6" below the cut.-----Cosmetic fix on the outside.------In rough water and waves you do not want any flexing there.
  4. R

    Driveshaft into Gearcase 1990 4hp Evinrude E4RESR

    The shift handle and shaft have a detent.----This would be clearly felt when shifting this motor without lower unit attached.----With lower unit attached it might be a wee different.----Should not change by installing a new CORRECT o-ring.
  5. R

    1980 j25rcsa solenoid issue

    Sorry-----But this is another example of why I try to refrain from giving advice on simple 12 volt parts and circuits.----It can be frustrating.------002 and 003 mean nothing !!
  6. R

    Identifying old 150

    Interesting modification on cowling and latches.----Lower unit appears to have had a " nosecone " added.
  7. R

    1980 j25rcsa solenoid issue

    What do you mean with 002 and 003 ???-----These are not electrical terms that mean anything to folks here.
  8. R

    1988 Force 50HP cranking with only one CD coil pack OK?

    Quick answer on an 8 year old post.-----Kill switch does both cylinders.----Start your own thread.
  9. R

    1972 Mercury 500 50 HP

    Rectifier has nothing to do with spark.----Battery is not involved with making spark.----Test this magneto before you install it on the motor.
  10. R

    90 hp mercury leaking oil

    Inspect fuel lift pump.
  11. R

    1980 j25rcsa solenoid issue

    If solenoid clicks the safety switch is good.----Inspect starter.----Get battery load tested.
  12. R

    Restoring a Johnson CD-12, 1955 5-1/2

    Was the tube in the pump when you assemble and tried a " stab in the dark " to assemble this ?
  13. R

    90 hp mercury leaking oil

    Smell like gasoline ?----Perhaps a leaking fuel pump or carburetors if it has those.
  14. R

    Restoring a Johnson CD-12, 1955 5-1/2

    It fits in a grommet half way up the exhaust housing and into a grommet in the pump.----Put the tube into the exhaust housing FIRST.
  15. R

    1976 merc 1150 impeller part number

    These motors from a bout 1964 to late 1980's all used the same impeller-----4 and 6 cylinder Mercury also Mercruisers used the same impeller.-----Every good boat shop would have it in stock.----Last 2 numbers in the part number are----84-----Should be easy to find on a list.
  16. R

    3hp jw-15 Johnson seahorse with no spark😞

    The motor is a 1959 model.----A complete evaluation should be done before spending money on parts.
  17. R

    '89 Johnson Propeller Issue(?)

    ???---The props for this motor are listed with 10" / 10.5" / 11" Diameters.-----Then the second number is the pitch ( angle of the blade ) likely from 8" to 15" ------Likely this motor left the factory with a 10" X 11" Prop.------But it is up to the owner / seller to select the correct prop for...
  18. R

    Fixer Upper

    If the structure under the floor and transom were made of wood you have a lot of work ahead of you.----Research on this site to see many projects.
  19. R

    2004 90HP Lower Mount Cover Plate

    Must be a salt water motor.-----All a corroded mess.-----Time to see if you canb salvage anything.----Install a new mount and then the cover plate.
  20. R

    No start and no tilt

    Check fuses.
Top