Search results

  1. C

    1990Bayliner Trophy twin Force 120s Hydraulic steering hoses burst

    Many hydraulic hose connector sizes are available in 90 and 45 angles. If the hoses are plenty long enough ? a goo skop can cut the damage off and reuse the hose. Just nned to find a place that makes up Hydraulic hoses. The shop wil want the stubby end to do the job right the first time...
  2. C

    Flat tire on haul-out today . . .

    Honda has low pressure alarms in tires. Saved me from running too low.
  3. C

    Already have passenger planes being flown as drones ?

    Another crash was unbelievable. The crash occurred because The aircraft company changed the the Autopilot switch from UP/ON to DOWN/ON. Never sending out a update bulletin about reversing the switch logic.
  4. C

    Need help: Bizarre Bravo III freshwater galvanic corrosion quandry

    Very powerful underground and underwater cables also energize the surrounding waters. anchors can damage the insulation enough to charge waters. There is so much that we do not know about areas or test for problems. If you ever fell a tingling while swimming. STOP And swim back to where you...
  5. C

    Need help: Bizarre Bravo III freshwater galvanic corrosion quandry

    We do not know what metal is used to make the thin bearing seal .
  6. C

    Already have passenger planes being flown as drones ?

    I do not fly for any reason. Except in a Piper Cub, in a search and rescue, looking for my brother. I was totally drained after the flight. Pilot risked our safety to help find my brother.
  7. C

    Already have passenger planes being flown as drones ?

    Modern fighters on aircraft carriers can be landed by the flight computers. Great for badly wounded plane and pilot. (y)(y)(y)
  8. C

    Already have passenger planes being flown as drones ?

    About 15 years ago 2 large planes locked out the pilots. From taking control of during a emergency. Oh well.
  9. C

    Flat tire on haul-out today . . .

    I had a leaky rubber valve stem holder. Wiggle while under water.
  10. C

    Need help: Bizarre Bravo III freshwater galvanic corrosion quandry

    Years ago 2 young girls jumped from boat into water to cool off. 1 drowned from electric current flowing in the water.
  11. C

    1994 bayliner trophy 24 foot walkaround

    Just make sure the motor can TILT UP all the way and you can remove the top cover of the motor for servicing.
  12. C

    Prop problem

    Yamaha had bad O B exhaust casting inside of motors. They were using SCRAP ALUMINUM. No company posts they are making bad products. Web sites and posting people tell what is happening.
  13. C

    Need help: Bizarre Bravo III freshwater galvanic corrosion quandry

    Those 2 marinas could be wired incorrectly. Have the marinas do a electrical test of the 120 / 240 VAC outlets to the water around the boat. T he water may be at 120 vac and electrocute a swimmer. It has happened and caused deaths.
  14. C

    1977 Evinrude 6hp recoil starter assembly

    If you do.....NOT......know the correct SAFE way to wind the rope around the flywheel ? DO NOT attempt it !! There is only 1 safe way to hand start the motor.
  15. C

    End of Season oil changes?

    A more important reason. The engine is running a unknown rich mixture at all speeds. More oil break down and sooner changes needed.
  16. C

    1994 bayliner trophy 24 foot walkaround

    You are doing the best you can with what you have with that very low transom. It really looks like a 20" standard transom was simply cut down for a 15 motor. OR the factory chopped down the inboard motor transom. There should be a...Splash Tray.... enclosure. All the way up to the top of...
  17. C

    Flat tire on haul-out today . . .

    I was doing interstate traffic speed. BANG !! we hit a road problem where the lane pavement was lower than the bridge pavement. I thought the front end and tire were damaged for sure. Checked at a dealer nearby. No damage. Changed tires to just below the maximum rated.
  18. C

    Need help: Bizarre Bravo III freshwater galvanic corrosion quandry

    I read the description on the website. Can not form a opinion about it from instructions given.
Top