Search results

  1. flashback

    Replaced Bellows now gears won't engage fully?

    Thx, better late than never...I don't weld so I spent an hour grinding flats on a deep well until a larger one would fit the flats..:)
  2. flashback

    Replaced Bellows now gears won't engage fully?

    Now you tell me! How long has it been like that? LOL
  3. flashback

    Garelick pedestal seat

    Mine have nothing on the stand just the open tube.
  4. flashback

    Fuel dumping in 5.0 cobra 1994 mechanical pump, not electric.

    There's a small hose coming from the pump to the air horn on the carb. If that's the vent you speak of then the pump is failing..
  5. flashback

    Garelick pedestal seat

    I'll clean things up and it should work fine, the engine and drive seem to be working and I'm finally getting to enjoy the boat this year..
  6. flashback

    Garelick pedestal seat

    Here's a picture, after cleaning the crud it does appear to have a nylon disk in the socket. Probably could use a bit of silicone lubricant.. Watcha think?
  7. flashback

    Garelick pedestal seat

    I'll get a pic soon, but as you said, it probably needs a bushing...
  8. flashback

    Garelick pedestal seat

    Never had a boat with pedestal seats, this one does and they don't seem to have any bearing but just aluminum to aluminum..is there a bushing missing?
  9. flashback

    5.7V8 with a 1.84 alpha one gear ratio

    I don't feel so bad posting in an older thread anymore! LOL
  10. flashback

    Radio protection cover

    Thanks for the tip, I don't need the complete cover, just the little plastic gadget that holds the cover closed..
  11. flashback

    Radio protection cover

    Now that most of my mechanical issues are repaired I'm looking at little things. Can anyone tell me what the catch is called so I can shop for it?
  12. flashback

    1996 Four Winns Sundowner with 5.0 Cobra engine and drive

    Yes the core plugs look to be a little rusty..
  13. flashback

    1984 Johnson 35hp tell tale at idle

    None of that was replaced last season, more likely last decade.
  14. flashback

    Fuel problem survives engine replacement

    Most all carb engines require pumping after sitting for a while..10 seems accessive tho.. sometimes it helps to set throttle about half way rather than at idle..
  15. flashback

    2001 Four Winns Horizon correct hull repair needed

    I see screw heads, that's how they stop leaks in a dike. Remove the screws and follow @tpenfield's advice...
  16. flashback

    Older boat/ motor and New Electronics

    Yes
  17. flashback

    Lifting Motor. Build Stand-Alone Gantry or Will This Work?

    Yea I guess, or dig a ditch and back the trailer into it. Once the motor is swinging from the tractor you can put it wherever you want..
  18. flashback

    Clear hose

    Just posting back, I found the input hose was brittle at the thermostat housing but still soft and plyable an inch up stream so being shade tree, I cut the crispy end off and plugged it back on...I have a piece of clear and may put it in this winter but for now I will enjoy the summer..
  19. flashback

    Lifting Motor. Build Stand-Alone Gantry or Will This Work?

    A few diagonals and that should work fine. What's with the joist system Could you use the tractor, that might even be better..
  20. flashback

    14' fix

    Don't know what happened to the previous posts but I would think they deflect spray and you would want them...
Top