Search results

  1. Grub54891

    A1G2 decisions. Rebuild or replace?

    If serviced properly every year- or- two, this would not have happened.
  2. Grub54891

    Pontoon scissor trailer - locking pin doesn't align when top rack cranked up

    Jhande may be right. The top of the oval hole looks to be stressed From someone raising it to high.
  3. Grub54891

    Pontoon scissor trailer - locking pin doesn't align when top rack cranked up

    Yup. I was just trying to figure it out myself.
  4. Grub54891

    Visual identification of a bad coupler?

    The 2'nd pic don't look good. What's stuck in the first pic?
  5. Grub54891

    Gimbal grease/oil seal possibly installed backwards.

    if you have the non-greaseable gimbal bearing, you don't need that seal. All it does is keep the grease from entering the engine room. Regardless it'll be fine.
  6. Grub54891

    Pontoon scissor trailer - locking pin doesn't align when top rack cranked up

    Is the nose of the pin rod hitting the winch frame? I'd think cutting it a tad shorter would make the thing not line up either. Just my morning thoughts without enough coffee.
  7. Grub54891

    Quit My Job . . .

    I've already got some who want me to work on their boats. I may or may not.... lol
  8. Grub54891

    Quit My Job . . .

    I’m retiring at the end of the month. We’ll see how that goes.
  9. Grub54891

    MC-1 Transom Mount Switch ID.

    Looks great! I’d like to know where you got those invisible spark plug wires, I hate that they clutter up engine room area.
  10. Grub54891

    3.0 GS - Overheat followed by power steering pump belt snap

    Doubt the two are related myself. Usually when I change a belt for a customer, all of them get changed as the age of one is the same as the other. Other than a bearing going south, perhaps the belt was just old.
  11. Grub54891

    Tachometer

    Look up the manual for the tach itself. Some company’s make their own colors.
  12. Grub54891

    Can the base of engine work? Two to bolts under engine are rusted and can

    From the inside of the bellow, carefully wiggle a flat screwdriver between the bellow, and the housing all the way around.
  13. Grub54891

    What boat is this?

    Some kind of deck boat.
  14. Grub54891

    3L rough idle, one black spark plug

    Tune up. Plugs, wires, cap, and rotor.
  15. Grub54891

    Need Assistance to Diagnose Bravo 3 - 5.0L MPI Vibration

    Have you checked this?
  16. Grub54891

    Need Assistance to Diagnose Bravo 3 - 5.0L MPI Vibration

    Had a few in the shop that developed a vibration. Just another one yesterday. Nothing to do with the drive. Turns out if you have the flat distributor cap, it’s most likely misfiring causing a vibration. Yeah any dizzy can do that from lack of service but them flat caps do it more often.
  17. Grub54891

    Question about Eagle Fish ID II

    You can splice them. You “ might” loose a bit of tuning but most of the time you don’t. I have the same unit, still working 20 plus years later.
  18. Grub54891

    Is Hull fixable

    If that's the only damage. There may be more that you can't see. run.
  19. Grub54891

    Humid/Dirty Boat

    Boat lift keeps it high and dry. Some have a canvass cover roof over them.
  20. Grub54891

    Painting my transom assembly.

    Can I use rustoleum on my transom assembly after I sand/prep/ prime it? Or will it fail fairly quickly? There is no corrosion on it, just the paint is wearing through due to age.
Top