Search results

  1. G

    1990 Force 120HP #2 Cyl zero compression and upon opening piston shows damage

    I could have sworn I already fixed it. I went one by one. Who knows why it was broken. I soldered all the wires then shrink-wrapped. Is tyere a test for the CD module? I did the voltage testing already. Posted it above. I am waiting for the Stator and I will go ahead and install it and the new...
  2. G

    1990 Force 120HP #2 Cyl zero compression and upon opening piston shows damage

    Right I know but it does replace 300-F654029-1 and newer 4 wire 300-888797 that I have right now. So both should work on my 1990 Force 120hp. I don't have the CDI one . Anyways, I did find another broken wire from the CD module that goes tonumber one. It's the white and yellow wire, connector...
  3. G

    1990 Force 120HP #2 Cyl zero compression and upon opening piston shows damage

    https://www.outboardignition.com/forcesearch.asp?cat=itemname&cval=3&hval=38&val=11 The first one says Replaces: F654029, F654029-1, 300-F654029-1, 300-888797 So it replaces both Old 8 wire 300-F654029-1 and newer 4 wire 300-888797
  4. G

    1990 Force 120HP #2 Cyl zero compression and upon opening piston shows damage

    So it should be safe to use to replace the old one right?
  5. G

    1990 Force 120HP #2 Cyl zero compression and upon opening piston shows damage

    Wonder if Jerry would know about the trigger if the 300-888797 4+1 can be used to replace the 8 wire 300-F654029-1
  6. G

    1990 Force 120HP #2 Cyl zero compression and upon opening piston shows damage

    On the new one I get 96ohms between any leads and 48 ohms between any lead to ground. The ground seems to be common. The 8 leads also had ground on every second lead when mounted on the outboard. It tested continuous to the mounting bolt. Anyways I do hope this fixes the hesitation issue. I...
  7. G

    1990 Force 120HP #2 Cyl zero compression and upon opening piston shows damage

    I did not but I recently fixed all the wires because I could get idle to stay at low RPM. Afterwards it stayed but I had the hesitation So earlier I removed the flywheel, so easy this time thank god, and I have the old trigger in front of me, I don't get any readings between 1, 2 , 3 and 4. I...
  8. G

    1990 Force 120HP #2 Cyl zero compression and upon opening piston shows damage

    The one I got is OEM Presto 300-888797 5 wire just like the CDI in your attachment. Can I use that and install per diagram below? The resistance between leads is in the 90s between 4,3 and 2 and in the 70s between 2 and 1. So that is a bit different.
  9. G

    1990 Force 120HP #2 Cyl zero compression and upon opening piston shows damage

    Thanks Nordin. I just read about the replacement 4 wire triggers on the CDI website. Supposetly they trimmed it down to 4 wires from 8 and the wires are stronger and longer lasting. And this is how you install. I thought it was tye wrong part but it seems they don't make the 8 wire anymore...
  10. G

    1990 Force 120HP #2 Cyl zero compression and upon opening piston shows damage

    So I ordered a trigger based on the online Crowley Marine info 300-888797. I received a 4 wire trigger with a 5th ground black. My trigger has 2 wire per cyl so 8 total. The only ones I found to be similar are for the 90hp but being a 3 cyl it's not good. Any idea where I can buy this.
  11. G

    1990 Force 120HP #2 Cyl zero compression and upon opening piston shows damage

    Any idea if based on the tests the stator should he changed also?
  12. G

    1990 Force 120HP #2 Cyl zero compression and upon opening piston shows damage

    Ok did some tests the trigger DVA shows 0.5 or less on 4 3 and 2 and 0.7 on 1 If I do resistance between trigger wires I get 52ohms between all except #1 ehich shows close to 1k ohms to the other leads. Supposed to be 50 something. On the statorsidr I get 550 k ohms between 4 and 3 blue to...
  13. G

    1990 Force 120HP #2 Cyl zero compression and upon opening piston shows damage

    When I tested every second wire from #4 down showed continuity to the mounting bolt at the end. And that was on both motors. The only one that didn't was for #1 wires which showed OL for both wires to the bolt and 55 ohms to each other.. So I think that there is something going on. Have no clue...
  14. G

    1990 Force 120HP #2 Cyl zero compression and upon opening piston shows damage

    Ok But the trigger wires have to sets each one is ground
  15. G

    1990 Force 120HP #2 Cyl zero compression and upon opening piston shows damage

    Anybody?
  16. G

    1990 Force 120HP #2 Cyl zero compression and upon opening piston shows damage

    OkForce Power, so I don't know if I am doing it right but I measured resistance between all the 4s, 3s,2s and 1s. I fillmed it all. Between the 1s I get 55ohms and between the last 2 and first 1 I get OL. The rest are 51 or 52. The other motor shows 51 or 52 also. Mostly 51 ohms. So between tye...
  17. G

    1990 Force 120HP #2 Cyl zero compression and upon opening piston shows damage

    https://www.dropbox.com/scl/fo/mypyevg9vnus8e1hkkfvt/h?rlkey=bgyg6s411ipnzyya8pru95jyi&dl=0 In the link there are 3 videos on at idle second in gear at higher rpm, third pretty much same. In the first one you can clearly hear and see the issue. Sometimes I heard a little choking. I am trying to...
  18. G

    1990 Force 120HP #2 Cyl zero compression and upon opening piston shows damage

    The rectifiers are the enclosed square ones with wires not the older rectangular ones with poles. I have no clue if they have a regulator built in.
  19. G

    1990 Force 120HP #2 Cyl zero compression and upon opening piston shows damage

    Ok so I bought the 800 cca starting battery and installed it next to the deep cycle one. I plan to install a switch: Off, 1, 2 and All. So my question is can the stator for the 120 charge 2 batteries, is it strong enough? I am gonna do the same on the other side for the other engine. I mean I...
  20. G

    1990 Force 120HP #2 Cyl zero compression and upon opening piston shows damage

    I was wondering I can fit 2 batteries on one side and only one on the other. I have 2 Lowrances lives 9 inch, 3 night lights, 3 transducers, at least 3 pumps for bait and bilge and stuff. Can I just buy a 1k cca starting for both engines? Found one 27M at Pep Boys for 140. I think I saw the 24M...
Top